PCAN-Chip USB
Stamp Module for the Implementation of CAN FD to USB Connections

PCAN-Chip USB Eval
IPEH-004025-EVAL € 250,00

All prices are plus the at present valid value added tax!

Description

For custom hardware designs a CAN connection can be implemented with the Stamp module, which communicates via USB 2.0 with the hardware. The integrated CAN controller supports the protocols CAN 2.0 A/B as well as CAN FD. The physical CAN connection is determined by external wiring. The Stamp module with its single-sided mounting and plated half-holes is suitable for automatic assembly.

The optional PCAN-Chip USB Eval board simplifies the development of a custom board based on the Stamp module.

In addition to the documentation for the integration of the Stamp module, the scope of supply of the PCAN-Chip USB includes licenses for the Windows and Linux device drivers, for the CAN monitor PCAN-View, and for the PCAN-Basic API.

Note:


The evaluation board (IPEH-004025-EVAL) can be ordered regularly via the online shop. If you are interested in the PCAN-Chip USB (IPEH-004025), please contact .

 

 

Specifications

PCAN-Chip USB

  • High-speed USB 2.0 (compatible to USB 1.1 & 3.0)
  • FPGA implementation of the CAN FD controller
  • Complies with CAN specifications 2.0 A/B and FD
  • CAN FD support for ISO and Non-ISO standard switchable
  • Measurement of bus load including error frames and overload frames on the physical bus
  • Induced error generation for incoming and outgoing CAN messages
  • 100-percent compatible with the USB device drivers and the software from PEAK-System
  • 2 connections for status LEDs
  • Voltage supply 3.3 V DC
  • New firmware can be loaded via USB
  • Dimensions: 25 x 20 mm
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

PCAN-Chip USB Eval

  • CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 303-1)
  • CAN transceiver NXP TJA1044GT
  • USB connector type B, standard ESD protection circuit
  • 2-color LED for CAN status and power supply
  • Voltage supply via USB
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Scope of supply

Scope of supply PCAN-Chip USB

  • PCAN-Chip USB
  • Documentation for wiring and integration including a sample circuit diagram
  • One license per chip for:
    • Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
    • CAN monitor PCAN-View for Windows® Details ...
    • Programming interface PCAN-Basic for developing applications with CAN connection Details ...
    • Programming interfaces for standardized protocols from the automotive sector

Scope of supply PCAN-Chip USB Eval

  • PCAN-Chip USB Eval
  • PCAN-Chip USB incl. scope of supply
  • USB connector cable

The license fees for CAN to Robert Bosch GmbH are included. If you are interested and for more information, please contact

 

 

Downloads

Device driver setup for Windows®

PEAK-System installation package for device drivers and tools for Windows® 10, 8.1, 7 (32/64-bit).

Device driver for Linux

Device drivers for PEAK CAN interfaces from Kernel 2.4 and higher.

PCAN-Chip USB & PCAN-Chip USB Eval manual

PCAN-View

Windows® software for displaying, transmitting, and recording CAN and CAN FD messages

PCAN-Basic API

API for the development of applications with CAN and CAN FD connections for Windows® 10, 8.1, 7 (32/64-Bit)

PCAN-Basic API (Linux)

API for the development of applications with CAN connection for Linux

PCAN-CCP API

API for the development of software for the communication with ECUs according to the CAN Calibration Protocol (CCP)

PCAN-XCP API

API for the development of software for the communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP)

PCAN-ISO-TP API

API for the transfer of data packages according to ISO-TP (ISO 15765-2)

PCAN-UDS API

API to communicate with control devices according to UDS (ISO 14229-1)

PCAN-OBD-2 API

API for the vehicle diagnostics according to OBD-2 (ISO 15765-4)

PCAN-PassThru API

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces. Installation for Windows® 10, 8.1, 7 (32/64-bit) includes interface DLLs, a configuration software, the PCAN-Basic API, and the PCAN-ISO-TP API. The download also contains the documentation (English).

More

Additional information on other pages:

PCAN-Chip USB forum: Section for the PCAN-Chip USB and the PCAN-Chip USB Eval for
question and support
The new standard CAN FD: support and compatible products
Device driver 4.x version history