PCAN-ExpressCard 34
CAN Interface for the ExpressCard/34 slot

PCAN-ExpressCard 34
IPEH-003004 € 220,00

All prices are plus the at present valid value added tax!

Description

The CAN adapter PCAN-ExpressCard 34 allows the connection of a CAN bus to embedded PCs and laptops with ExpressCard slots. A galvanic isolation of up to 300 Volts decouples the PC from the CAN bus.

The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.

 

 

Technical Specifications

Pin assignment D-Sub

Pin Pin assignment
1 Not connected
2 CAN-L
3 GND
4 Not connected
5 Not connected
6 GND
7 CAN-H
8 Not connected
9 Not connected
  • Card for the ExpressCard slot
  • Type ExpressCard/34 (compatible with ExpressCard/54 slots)
  • High-speed CAN connection (ISO 11898-2)
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • CAN bus connection via D-Sub, 9-pin
    (in accordance with CiA® 303-1)
  • FPGA implementation of the CAN controller (SJA1000 compatible)
  • NXP PCA82C251 CAN transceiver
  • Galvanic isolation on the CAN connection
    up to 300 V
  • Extended operating temperature range
    from -40 to 85 °C (-40 to 185 °F)

Scope of supply

  • PCAN-ExpressCard 34 CAN interface
  • Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
  • CAN monitor PCAN-View for Windows® Details ...
  • Programming interface PCAN-Basic for developing applications with CAN connection Details ...
  • Programming interfaces for standardized protocols from the automotive sector
  • Manual in PDF format

Downloads

Device driver setup for Windows®

PEAK-System installation package for device drivers and tools for Windows® 10, 8.1, 7 (32/64-bit).

Device driver for Linux

Device drivers for PEAK CAN interfaces from Kernel 2.4 and higher.

PCAN-ExpressCard 34 manual

PCAN-View

Windows® software for displaying, transmitting, and recording CAN and CAN FD messages

PCAN-Basic API

API for the development of applications with CAN and CAN FD connections for Windows® 10, 8.1, 7 (32/64-Bit)

PCAN-Basic API (Linux)

API for the development of applications with CAN connection for Linux

PCAN-CCP API

API for the development of software for the communication with ECUs according to the CAN Calibration Protocol (CCP)

PCAN-XCP API

API for the development of software for the communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP)

PCAN-ISO-TP API

API for the transfer of data packages according to ISO-TP (ISO 15765-2)

PCAN-UDS API

API to communicate with control devices according to UDS (ISO 14229-1)

PCAN-OBD-2 API

API for the vehicle diagnostics according to OBD-2 (ISO 15765-4)

PCAN-PassThru API

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces. Installation for Windows® 10, 8.1, 7 (32/64-bit) includes interface DLLs, a configuration software, the PCAN-Basic API, and the PCAN-ISO-TP API. The download also contains the documentation (English).

BaudTool

Windows® software for calculating the BTR0/BTR1 baud rate register

More

Additional information on other pages:

PEAK-System Forum: Section for the PCAN-ExpressCard 34 for questions and support
Device driver 4.x version history