CAN Interface for PC/104

PCAN-PC/104 Single Channel
IPEH-002054 € 128,00
PCAN-PC/104 Dual Channel
IPEH-002055 € 149,00
PCAN-PC/104 Single Channel opto-decoupled
IPEH-002056 € 169,00
PCAN-PC/104 Dual Channel opto-decoupled
IPEH-002057 € 200,00

All prices are plus the at present valid value added tax!


The PCAN-PC/104 card enables the connection of one or two CAN networks to a PC/104 system. Multiple PCAN-PC/104 cards can easily be operated using interrupt sharing.

The card is available as a single or dual-channel version. The opto-decoupled versions also guarantee galvanic isolation of up to 500 Volts between the PC and the CAN sides.

The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.



Technical Specifications

Pin assignment D-Sub

Pin Pin assignment
1 Not connected / optional +5V
4 Not connected
5 Not connected
8 Not connected
9 Not connected / optional +5V
  • Form factor PC/104
  • Multiple PC/104 cards can be operated in parallel (interrupt sharing)
  • 14 port and 8 interrupt addresses are available for configuration using jumpers
  • 1 or 2 High-speed CAN channels (ISO 11898-2)
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • Compliant with CAN specifications
    2.0A (11-bit ID) and 2.0B (29-bit ID)
  • Connection to CAN bus through D-Sub slot bracket, 9-pin (in accordance with CiA® 303-1)
  • NXP SJA1000 CAN controller, 16 MHz clock frequency
  • NXP PCA82C251 CAN transceiver
  • 5-Volt supply to the CAN connection can be connected through a solder jumper,
    e.g. for external bus converter
  • Galvanic isolation on the CAN connection up to 500 V, separate for each CAN channel
    (only for IPEH-002056 and IPEH-002057)
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Scope of supply

  • PCAN-PC/104 card
  • Slot bracket with D-Sub connectors for the CAN bus
  • Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
  • Device driver for Windows® CE 6.x (x86 and ARMv4 processor support)
  • CAN monitor PCAN-View for Windows® Details ...
  • CAN monitor PCAN-View for DOS
  • Programming interface PCAN-Basic for developing applications with CAN connection Details ...
  • Programming interfaces for standardized protocols from the automotive sector
  • Manual in PDF format


PCAN-PC/104 package

Package contains device drivers for Windows® 10, 8.1, 7 (32-bit), the PCAN-Basic API, the CAN monitor PCAN-View, and documentation (German and English).

PCAN-PC/104 manual

PCAN-Linux device driver

Device drivers for PEAK CAN interfaces from Kernel 2.4 and higher.


Windows® compatible software for displaying CAN and CAN FD messages


API for the development of applications with CAN and CAN FD connections for Windows® 10, 8.1, 7 (32/64-Bit)

PCAN-Basic API (Linux)

API for the development of applications with CAN connection for Linux


API for the development of software for the communication with ECUs according to the CAN Calibration Protocol (CCP)


API for the development of software for the communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP)


API for the transfer of data packages according to ISO-TP (ISO 15765-2)


API to communicate with control devices according to UDS (ISO 14229-1)


API for the vehicle diagnostics according to OBD-2 (ISO 15765-4)


Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces. Installation for Windows® 10, 8.1, 7 (32/64-bit) includes interface DLLs, a configuration software, the PCAN-Basic API, and the PCAN-ISO-TP API. The download also contains the documentation (English).

Windows® CE6 package

PCAN-CE package for Microsoft Windows® CE 6.x

Windows® 2000 package

Device drivers for Windows® 2000 and the CAN monitor PCAN-View.


Windows® software for calculating the BTR0/BTR1 baud rate register


Additional information on other pages:

PEAK-System Forum: Section for the PCAN-PC/104 card for questions and support
Device driver 2.x version history
Device driver CE 6.x version history


Suitable to be used with:

ISA-PC/104-Adapter: Test interface for PC/104 cards