PCAN-PCI Express
CAN Interface for PCI Express

PCAN-PCI Express Single Channel galv. isolated
IPEH-003026 € 220,00
PCAN-PCI Express Dual Channel galv. isolated
IPEH-003027 € 280,00

All prices are plus the at present valid value added tax!

Description

The PCAN-PCI Express card enables the connection of a PC with PCI Express slots to CAN networks. There is galvanic isolation of up to 500 Volts between the computer and CAN sides. There are versions with one, two, and four channels.

The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.

Please note:


The product PCAN-PCI Express Four Channel (IPEH-003040) is no longer manufactured! Alternatively, the PCAN-PCI Express FD Four Channel (IPEH-004040) can be used, since it behaves identically concerning the CAN functionality.

Technical Specifications

Pin assignment D-Sub 

PinPin assignment
1Not connected / optional +5V
2CAN-L
3GND
4Not connected
5Not connected
6GND
7CAN-H
8Not connected
9Not connected
  • PC plug-in card (PCIe-x1) for PCI Express slots
  • 1, 2, or 4 High-speed CAN channels (ISO 11898-2)
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • Compliant with CAN specifications 
    2.0A (11-bit ID) and 2.0B (29-bit ID)
  • CAN bus connection via D-Sub, 
    9-pin (in accordance with CiA® 303-1)
  • FPGA implementation of the CAN controller
    (SJA1000 compatible)
  • NXP PCA82C251 CAN transceiver
  • Galvanic isolation on the CAN connection up to
    500 V, separate for each CAN channel
  • 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Scope of supply

  • PCAN-PCI Express card
  • Slot bracket with D-Sub connectors for the CAN bus (only four-channel version)
  • Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
  • CAN monitor PCAN-View for Windows® Details ...
  • Programming interface PCAN-Basic for developing applications with CAN connection Details ...
  • Programming interfaces for standardized protocols from the automotive sector
  • Manual in PDF format

Downloads

PCAN-PCI Express package

Package contains device drivers for Windows® 10, 8.1, 7 (32/64-bit), the PCAN-Basic API, the CAN monitor PCAN-View, and documentation (German and English).

PCAN-PCI Express manual

PCAN-Linux device driver

Device drivers for PEAK CAN interfaces from Kernel 2.4 and higher.

PCAN-View

Windows® software for displaying, transmitting, and recording CAN and CAN FD messages

PCAN-Basic API

API for the development of applications with CAN and CAN FD connections for Windows® 10, 8.1, 7 (32/64-Bit)

PCAN-Basic API (Linux)

API for the development of applications with CAN connection for Linux

PCAN-CCP API

API for the development of software for the communication with ECUs according to the CAN Calibration Protocol (CCP)

PCAN-XCP API

API for the development of software for the communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP)

PCAN-ISO-TP API

API for the transfer of data packages according to ISO-TP (ISO 15765-2)

PCAN-UDS API

API to communicate with control devices according to UDS (ISO 14229-1)

PCAN-OBD-2 API

API for the vehicle diagnostics according to OBD-2 (ISO 15765-4)

PCAN-PassThru API

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces. Installation for Windows® 10, 8.1, 7 (32/64-bit) includes interface DLLs, a configuration software, the PCAN-Basic API, and the PCAN-ISO-TP API. The download also contains the documentation (English).

Windows® 2000 package

Device drivers for Windows® 2000 and the CAN monitor PCAN-View.

BaudTool

Windows® software for calculating the BTR0/BTR1 baud rate register

More

Additional information on other pages:

PEAK-System Forum: Section for the PCAN-PCI Express card for questions and support
Device driver 4.x version history