PCAN-USB
CAN Interface for USB

PCAN-USB
IPEH-002021 € 180,00
PCAN-USB opto-decoupled
IPEH-002022 € 220,00

All prices are plus the at present valid value added tax!

Description

The PCAN-USB adapter enables simple connection to CAN networks. Its compact plastic casing makes it suitable for mobile applications.

The opto-decoupled version guarantees galvanic isolation of up to 500 Volts between the PC and the CAN side.

The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.

 

 

Technical Specifications

Pin assignment D-Sub

Pin Pin assignment
1 Not connected / optional +5V
2 CAN-L
3 GND
4 Not connected
5 Not connected
6 GND
7 CAN-H
8 Not connected
9 Not connected / optional +5V
  • Adapter for the USB connection (USB 1.1, compatible with USB 2.0 and USB 3.0)
  • High-speed CAN connection (ISO 11898-2)
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • Time stamp resolution approx. 42 µs
  • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • CAN bus connection via D-Sub, 9-pin
    (in accordance with CiA® 102)
  • NXP SJA1000 CAN controller, 16 MHz clock frequency
  • NXP PCA82C251 CAN transceiver
  • 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
  • Voltage supply via USB
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Optionally available:

  • Galvanic isolation on the CAN connection up to 500 V

 

 

Scope of supply

  • PCAN-USB in plastic casing
  • Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
  • Device driver for Windows® CE 6.x (x86 and ARMv4 processor support)
  • CAN monitor PCAN-View for Windows® Details ...
  • Programming interface PCAN-Basic for developing applications with CAN connection Details ...
  • Programming interfaces for standardized protocols from the automotive sector
  • Manual in PDF format

 

 

Downloads

PCAN-USB package

Package contains device drivers for Windows® 10, 8.1, 7 (32/64-bit), the PCAN-Basic API, the CAN monitor PCAN-View, and documentation (German and English).

PCAN-USB manual

Windows® CE6 package

PCAN-CE package for Microsoft Windows® CE 6.x

Windows® 2000 package

Device drivers for Windows® 2000 and the CAN monitor PCAN-View.

PCAN-Linux device driver

Device drivers for PEAK CAN interfaces from Kernel 2.4 and higher.

PCAN-View

Windows® compatible software for displaying CAN and CAN FD messages

BaudTool

Windows® software for calculating the BTR0/BTR1 baud rate register

PCAN-Basic API

API for the development of applications with CAN and CAN FD connections for Windows® 10, 8.1, 7, Vista (32/64-Bit)

PCAN-Basic API (Linux)

API for the development of applications with CAN connection for Linux

PCAN-CCP API

API for the development of software for the communication with ECUs according to the CAN Calibration Protocol (CCP)

PCAN-XCP API

API for the development of software for the communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP)

PCAN-PassThru API

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces. Installation for Windows® 10, 8.1, 7, Vista (32/64-bit) includes interface DLLs, a configuration software, the PCAN-Basic API, and the PCAN-ISO-TP API. The download also contains the documentation (English).

PCAN-ISO-TP API

API for the transfer of data packages according to ISO-TP (ISO 15765-2)

PCAN-UDS API

API to communicate with control devices according to UDS (ISO 14229-1)

PCAN-OBD-2 API

API for the vehicle diagnostics according to OBD-2 (ISO 15765-4)

More

Additional information on other pages:

PEAK-System forum: Section for the PCAN-USB for questions and support
Device driver 4.x version history
Device driver CE 6.x version history