PCAN-cPCI
CAN Interface for CompactPCI

PCAN-cPCI Dual Channel opto-decoupled
IPEH-003021 € 450,00
PCAN-cPCI Four Channel opto-decoupled
IPEH-003022 € 580,00

All prices are plus the at present valid value added tax!

Description

The PCAN-cPCI card enables the connection of an industrial computer system with CompactPCI to CAN networks. There is galvanic isolation of up to 500 Volts between the computer and CAN sides. The card is available as a dual or four-channel version.

The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.

 

 

Technical Specifications

Pin assignment D-Sub

Pin Pin assignment
1 Not connected / optional +5V
2 CAN-L
3 GND
4 Not connected
5 Not connected
6 GND
7 CAN-H
8 Not connected
9 Not connected / optional +5V
  • Extension card with euroboard form factor (3U) for a CompactPCI system
  • 2 or 4 High-speed CAN channels (ISO 11898-2)
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 303-1)
  • NXP SJA1000 CAN controller, 16 MHz clock frequency
  • NXP PCA82C251 CAN transceiver
  • 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
  • Galvanic isolation on the CAN connection up to 500 V, separate for each CAN channel
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Scope of supply

  • Plug-in card PCAN-cPCI card
  • Slot bracket with D-Sub connectors for the CAN bus (only four-channel version)
  • Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
  • Device driver for Windows® CE 6.x (x86 and ARMv4 processor support)
  • CAN monitor PCAN-View for Windows® Details ...
  • Programming interface PCAN-Basic for developing applications with CAN connection Details ...
  • Programming interfaces for standardized protocols from the automotive sector
  • Manual in PDF format

Downloads

Device driver setup for Windows

PEAK-System installation package for device drivers and tools for Windows® 10, 8.1, 7 (32/64-bit) for our PC interfaces.

Device driver for Linux

Device drivers for PEAK CAN interfaces from Kernel 2.4 and higher.

PCAN-cPCI manual

PCAN-View

Windows® software for displaying, transmitting, and recording CAN and CAN FD messages

PCAN-Basic API

API for the development of applications with CAN and CAN FD connections for Windows® 10, 8.1, 7 (32/64-Bit)

PCAN-Basic API (Linux)

API for the development of applications with CAN connection for Linux

PCAN-CCP API

API for the development of software for the communication with ECUs according to the CAN Calibration Protocol (CCP)

PCAN-XCP API

API for the development of software for the communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP)

PCAN-ISO-TP API

API for the transfer of data packages according to ISO-TP (ISO 15765-2)

PCAN-UDS API

API to communicate with control devices according to UDS (ISO 14229-1)

PCAN-OBD-2 API

API for the vehicle diagnostics according to OBD-2 (ISO 15765-4)

PCAN-PassThru API

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces. Installation for Windows® 10, 8.1, 7 (32/64-bit) includes interface DLLs, a configuration software, the PCAN-Basic API, and the PCAN-ISO-TP API. The download also contains the documentation (English).

Windows CE6 package

PCAN-CE package for Microsoft Windows® CE 6.x

Windows 2000 package

Device drivers for Windows® 2000 and the CAN monitor PCAN-View.

BaudTool

Windows® software for calculating the BTR0/BTR1 baud rate register

More

Additional information on other pages:

PEAK-System Forum: Section for the PCAN-cPCI card for questions and support
CAN device driver 4.x version history
CAN device driver CE 6.x version history