PCAN-miniPCIe
CAN interface for PCI Express Mini (PCIe)

PCAN-miniPCIe Single Channel
IPEH-003048 € 220,00
PCAN-miniPCIe Dual Channel
IPEH-003049 € 280,00

All prices are plus the at present valid value added tax!

Description

The PCAN-miniPCIe card enables the connection of embedded PCs and laptops with PCI Express Mini slots to CAN networks. There is galvanic isolation of up to 300 Volts between the computer and CAN sides. The card is available as a single or dual-channel version.

The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.

 

 

Technical Specifications

Pin assignment D-Sub

Pin Pin assignment
1 Not connected
2 CAN-L
3 GND
4 Not connected
5 Not connected
6 GND
7 CAN-H
8 Not connected
9 Not connected
  • CAN interface for the PCI Express Mini slot (uses PCIe lane)
  • 1 or 2 High-speed CAN channels (ISO 11898-2)
  • CAN bus connection via connection cable and D-Sub, 9-pin (in accordance with CiA® 303-1)
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • FPGA implementation of the CAN controller (SJA1000 compatible)
  • NXP PCA82C251 CAN transceiver
  • Galvanic isolation on the CAN connection up to
    300 V, separate for each CAN channel
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Scope of supply

  • PCAN-miniPCIe card
  • Connection cable including D-Sub plug for each channel
  • Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
  • CAN monitor PCAN-View for Windows® Details ...
  • Programming interface PCAN-Basic for developing applications with CAN connection Details ...
  • Programming interfaces for standardized protocols from the automotive sector
  • Manual in PDF format

Downloads

Device driver setup for Windows®

PEAK-System installation package for device drivers and tools for Windows® 10, 8.1, 7 (32/64-bit).

Device driver for Linux

Device drivers for PEAK CAN interfaces from Kernel 2.4 and higher.

PCAN-miniPCIe manual

PCAN-View

Windows® software for displaying, transmitting, and recording CAN and CAN FD messages

PCAN-Basic API

API for the development of applications with CAN and CAN FD connections for Windows® 10, 8.1, 7 (32/64-Bit)

PCAN-Basic API (Linux)

API for the development of applications with CAN connection for Linux

PCAN-CCP API

API for the development of software for the communication with ECUs according to the CAN Calibration Protocol (CCP)

PCAN-XCP API

API for the development of software for the communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP)

PCAN-ISO-TP API

API for the transfer of data packages according to ISO-TP (ISO 15765-2)

PCAN-UDS API

API to communicate with control devices according to UDS (ISO 14229-1)

PCAN-OBD-2 API

API for the vehicle diagnostics according to OBD-2 (ISO 15765-4)

PCAN-PassThru API

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces. Installation for Windows® 10, 8.1, 7 (32/64-bit) includes interface DLLs, a configuration software, the PCAN-Basic API, and the PCAN-ISO-TP API. The download also contains the documentation (English).

Windows® 2000 package

Device drivers for Windows® 2000 and the CAN monitor PCAN-View.

BaudTool

Windows® software for calculating the BTR0/BTR1 baud rate register

More

Additional information on other pages:

PEAK-System Forum: Section for the PCAN-miniPCIe card for questions and support
Device driver 4.x version history

Suitable to be used with:

PCIe-miniPCIe Adapter: PCI Express Low-Profile Adapter for PCI Express Mini Cards