Your basket is empty.
All prices are plus the at present valid value added tax!
PCAN-Repeater DR
CAN Repeater for the Decoupling of Bus Segments
The PCAN-Repeater DR creates a connection between two High-speed CAN busses with galvanic isolation of up to 5 kV. Both CAN channels are decoupled from each other and from the power supply. All message traffic including error frames is forwarded 1:1 between both channels, if necessary, in one direction only. The PCAN-Repeater DR behaves passively and is transparent from the perspective of the CAN bus. LEDs display the current bus status. With its DIN rail casing and extended temperature range support, this module is suitable for use in an industrial environment.
Please note
Due to the CAN protocol, the maximum length of a CAN bus depends on the bit rate. Therefore, a bus cannot be extended with the PCAN-Repeater DR.
The physical total length of the CAN bus is reduced with each built-in PCAN-Repeater DR according to its signal delay.
Specifications
- Two High-speed CAN channels (ISO 11898-2)
- Galvanic isolation rated up to 5 kV according to IEC60601-1,
between both CAN channels and between CAN and power supply - Bit rates up to 1 Mbit/s
- Compliant with CAN specification
2.0A (11-bit ID) and 2.0B (29-bit ID) - NXP PCA82C251 CAN transceiver
- Connections for CAN and power supply via 4-pin screw terminal block (Phoenix)
- LEDs display CAN bus load and CAN errors
- Each CAN channel can be selectively terminated
- Listen-only mode for CAN channel 1 or CAN channel 2 can be switched selectively
- Plastic casing (width: 22.5 mm) for mounting on a DIN rail (DIN EN 60715 TH35)
- Voltage supply from 8 to 30 V
- Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
Scope of supply
- PCAN-Repeater DR in DIN rail plastic casing
- 3 mating connectors for power supply and
CAN connections - Manual in PDF format
Downloads
Problems while downloading the files? Use the right mouse button and save as ...
PCAN-Repeater DR manual in PDF format (German)
PCAN-Repeater DR manual in PDF format (English)