To your Basket
Your basket is empty.
All prices are plus the at present valid value added tax!
PCAN-AU5790
Bus Converter High-speed CAN to Single-wire CAN
The PCAN-AU5790 bus converter establishes a connection between a High-speed CAN bus (ISO 11898-2) and a Single-wire CAN bus (SAE J2411). One of the most important potential applications of the bus converter is a simple connection between a PEAK CAN interface (e.g. PCAN-USB) and a Single-wire CAN bus.
Specifications
- There are three different operating modes for the SW-CAN side which can be set using a sliding switch. Normal (33.3 kbit/s), High-speed (83.3 kbit/s) and Wake-up
- Indicator LEDs for power supply (red) and wake-up signals (yellow)
- Power supply (5 V, 150 mA) through HS-CAN connection (a current list of PEAK CAN interfaces with suitable supply voltage is available on request)
- If the power supply has a lower current output than 150 mA, an additional 12-Volt supply is needed via the SW-CAN connector
- Operating temperature range from 0 to 70 °C (32 to 158 °F)
Pin assignment Female D-Sub Connector
| Pin | Pin assignment High-speed CAN (82C251) |
|---|---|
| 1 | 5V Power supply |
| 2 | CAN-L |
| 3 | GND |
| 4 | Not connected |
| 5 | Not connected |
| 6 | GND |
| 7 | CAN-H |
| 8 | Not connected |
| 9 | Not connected / optional +5V |
Pin assignment Male D-Sub Connector
| Pin | Pin assignment Single-wire CAN (AU5790) |
|---|---|
| 1 | Not connected |
| 2 | Not connected |
| 3 | GND |
| 4 | Not connected |
| 5 | CAN |
| 6 | GND |
| 7 | Not connected |
| 8 | Not connected |
| 9 | VBAT |
Scope of supply
- Adapter in plastic casing
- Manual in PDF format
Other transceiver types on request
Downloads
Problems while downloading the files? Use the right mouse button and save as ...
PCAN-AU5790 manual in PDF format (German)
PCAN-AU5790 manual in PDF format (English)