PCAN-PCI

PC-PCI to CAN interface

The PCAN-PCI card provides an inexpensive solution for connecting a CAN bus to a PC using a PCI bus system. There is no need to configure the card in order to adapt it to the PC, since the driver registers it automatically. The PCAN-PCI card package includes software for Windows® and sample sources for in-house programming.
The card is equipped with the SJA1000 CAN controller and the 82C251 driver. Connection to the CAN bus is through a 9-pin Sub-D connector in which the pin assignment complies with CiA draft standard DS 102-1.
The card is available in a single-channel or dual-channel version.

The PCAN-PCI ISO versions also include optical decoupling. Built-in DC/DC converters and optical couplers provide electrical isolation to a maximum of 500 V between the PC and the CAN network.

Pin assignment 9-pole connector male:	Pin	Configuration
	1	Not connected / +5V optional
	2	CAN-L
	3	CAN-GND
	4	Not connected
	5	Not connected
	6	CAN-GND
	7	CAN-H
	8	Not connected
	9	Not connected / +5V optional

Specifications

Baud rate settings up to 1 Mbit/s
PC plug-in card for PCI slot
Fully PNP compliant
Philips SJA1000 CAN controller with 16 MHz clock frequency
82C251 CAN transceiver
SMD technology for space-saving dimensions
CAN bus connection via Sub-D, 9-pin
(to CiA DS102-1)
Hardware can be reset via software

Optional:

Electrical isolation to 500 V
Also available in a dual-channel version

Ordering information
Designation	Art. No.
PCAN-PCI single-channel	IPEH-002064
PCAN-PCI dual-channel	IPEH-002065
PCAN-PCI single-channel ISO	IPEH-002066
PCAN-PCI dual-channel ISO	IPEH-002067

Scope of supply
PCAN-PCI card PCAN-View CAN monitor for WIN 9x/ME and NT/2000/XP Device drivers (sys, VxD) and interface DLL for WIN 9x/ME and NT/2000/XP CD containing PCAN-Light software interface DLL for driving CD containing sample program with source code in VB, Delphi and VC LINUX driver incl. source code available at no cost CD containing manual in PDF format