PCAN-USB

PC USB to CAN interface

For easy and cost-effective integration into 2.0A and 2.0B CAN networks operating at a maximum baud rate of 1 Mbit/s.
With its compact plastic casing, the USB-to-CAN converter is ideally suited for use with laptops and notebooks. Software and in-house programming sources are supplied to make the package complete.

The USB-ISO version also includes optical decoupling. Built-in DC/DC converters and optical couplers provide

electrical isolation to a maximum of 500 V between the PC and the CAN network.

Pin assignment 9-pole connector male:	Pin	Configuration
	1	Not connected / +5V optional
	2	CAN-L
	3	CAN-GND
	4	Not connected
	5	Not connected
	6	CAN-GND
	7	CAN-H
	8	Not connected
	9	Not connected / +5V optional

Specifications

Baud rate settings up to 1 MBit/s
PHILIPS SJA1000 CAN controller,
16 MHz clock frequency
82C251 CAN transceiver
Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
SJA1000 hardware can be reset via software
Supplied in space-saving plastic casing with USB cable to 9-pin DIN (CAN)
CAN bus connection via Sub-D, 9-pin
(to CiA DS102-1)

For PCAN-USB ISO only:

Electrical isolation to 500 V

Ordering information
Designation	Art. No.
PCAN-USB	IPEH-002021
PCAN-USB ISO	IPEH-002022

Scope of supply
Interface in compact plastic casing Voltage supply via USB bus PCAN-View CAN monitor for Windows(c) 2000/XP Device drivers (sys and interface DLL for Windows(c) 2000/XP CD containing PCAN-Light software interface DLL for driving CD containing sample program with source code in VB, Delphi and VC LINUX driver available at no cost CD containing manual in PDF format