Multiplex in transmission

Universal Controller for CAN Applications

Multiplex in transmission

Postby mnedelec » Wed 6. Sep 2017, 10:54

Hi,
I would like to know if it's possible to use multiplexing in transmit mode, ie depending on a multipler variable send on a CAN message, the PCAN MIO device send back differents values.
For example :

I send the CAN message ID: 0x78D data : XX 00 00 00 00 00 00 00 (XX the multiplexer, let's say 01, 02, 03)

The PCAN MIO sends back ID: 0x78D data : XX XX 00 00 00 00 00 00 (XX XX is the 16 bit value of AInXX value, depending of the multiplexer).

Thank you in advance,

M. NEDELEC
mnedelec
 
Posts: 1
Joined: Wed 6. Sep 2017, 10:34

Re: Multiplex in transmission

Postby U.Wilhelm » Thu 7. Sep 2017, 14:02

Could you please conatct us by e-mail (support[at]peak-system.com)
--------------------------------
PEAK-System Technik
Technical Support Team
support@peak-system.com
-------------------------------
User avatar
U.Wilhelm
Sales & Support
Sales & Support
 
Posts: 808
Joined: Fri 10. Sep 2010, 19:34
Location: Darmstadt


Return to PCAN-MIO



cron