This website uses cookies for analytics, for logins to the online shop and the forum, and for the handling of an order. By browsing this website you agree to the use of cookies. Detailed information on their use can be found in our privacy policy.
With the release of various hardware and software products, PEAK-System is a pioneer in the introduction of the new CAN FD standard.
With CAN FD (Flexible Data rate) the robust and long- lasting CAN specification has been extended with properties which are primarily designed for larger amounts of data. Higher bit rates up to 12 Mbit/s for the data of the CAN frames and the use of up to 64 data bytes in a single CAN frame are the main criteria.
CAN FD is downward-compatible to the CAN 2.0 A/B standard, thus CAN FD nodes can be used in existing CAN networks. However, in this case the CAN FD extensions are not applicable.
Since the first implementations of CAN FD, the protocol has been improved and is now included in the standard ISO 11898-1. The revised CAN FD standard is not compatible with the original protocol. PEAK-System takes this into account by supporting both protocol versions with their CAN FD interfaces. If required, the user can switch to the CAN FD protocol used in the environment by software („Non-ISO“ and „ISO“).
PEAK-System enhances its CAN product range step by step with CAN FD ability.
IPEH-004022
IPEH-004061
IPEH-004062
IPEH-004063
IPEH-004064
IPEH-004026
IPEH-004027
IPEH-004040
IPEH-004045
IPEH-004046
IPEH-004047
IPEH-004083
IPEH-004084
IPEH-004085
IPEH-004080
IPEH-004081
IPEH-004082
IPEH-003080
IPEH-003081
IPEH-003082
IPEH-003087
IPEH-003083
IPEH-003084
IPEH-004025
IPEH-002214
IPEH-002215
IPEH-002220
IPEH-004012
IPEH-003069
IPEH-003070
IPES-006000
IPES-006090
IPES-004070
Some of our existing CAN products can be operated with the standard CAN FD, due to their operating principle.
IPEH-002026
Suitable for the use in CAN FD busses with data bit rates up to 5 Mbit/s and nominal bit rates up to 500 kbit/s
IPEH-002038
Suitable for the use in CAN FD busses with data bit rates up to 2 Mbit/s and nominal bit rates up to 1 Mbit/s
IPEH-004038
Suitable for the use in CAN FD busses with data bit rates up to 4 Mbit/s and nominal bit rates up to 1 Mbit/s
IPEK-003002
IPEK-003003
IPEK-003012
IPEK-003000
IPEK-003001
IPEK-003011
IPEK-003008
IPEK-003013