PCAN-Chip USB

For custom hardware designs a CAN connection can be implemented with the Stamp module, which communicates via USB 2.0 with the hardware. The integrated CAN controller supports the protocols CAN 2.0 A/B as well as CAN FD. The physical CAN connection is determined by external wiring. The Stamp module with its single-sided mounting and plated half-holes is suitable for automatic assembly.

The optional PCAN-Chip USB Eval board simplifies the development of a custom board based on the Stamp module.

In addition to the documentation for the integration of the Stamp module, the scope of supply of the PCAN-Chip USB includes licenses for the Windows and Linux device drivers, for the CAN monitor PCAN-View, and for the PCAN-Basic API.

Note

The evaluation board (IPEH-004025-EVAL) can be ordered regularly via the online shop. If you are interested in the PCAN-Chip USB (IPEH-004025), please contact info@peak-system.com.

PCAN-Chip USB

• High-speed USB 2.0 (compatible to USB 1.1 & 3.0)
• FPGA implementation of the CAN FD controller
• Complies with CAN specifications 2.0 A/B and FD
• CAN FD support for ISO and Non-ISO standard switchable
• Measurement of bus load including error frames on the physical bus
• Induced error generation for incoming and outgoing CAN messages
• 100-percent compatible with the USB device drivers and the software from PEAK-System
• Connections for 2 status LEDs
• 5 digital inputs/outputs and 1 analog input (access via PCAN-Basic API)
• Power supply 3.3 V DC
• Firmware update via USB
• Dimensions: 25 x 20 mm
• Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)
  
  

PCAN-Chip USB Eval

• CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 106)
• CAN transceiver NXP TJA1044GT
• USB connector type B, standard ESD protection circuit
• Dual-color LED for CAN status and power supply
• Power supply via USB
• Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)

Scope of supply PCAN-Chip USB

• Stamp module PCAN-Chip USB; delivery, depending on quantity, as cut tape or reel for automatic placement machines
• Documentation for wiring and integration including a sample circuit diagram
• One license per chip for:
• Device drivers for Windows® 11 (x64/ARM64), 10 (x64), and Linux
• CAN monitor PCAN-View for Windows® Details ...
• Programming interface PCAN-Basic for developing applications with CAN connection Details ...
• Programming interfaces for standardized protocols from the automotive sector
  
  

Scope of supply PCAN-Chip USB Eval

• PCAN-Chip USB Eval
• PCAN-Chip USB incl. scope of supply
• USB connector cable
  
  

The license fees for CAN FD to Robert Bosch GmbH are included. If you are interested and for more information, please contact info@peak-system.com.

Additional information

• PEAK-System Forum: Section for the PCAN-Chip USB and the PCAN-Chip USB Eval for question and support
• The standard CAN FD: Support and compatible products
• CAN device driver 4.x: Version history
• PCAN-Chip USB: Firmware version history