PCAN-Diag Editor Version History

2023-03-03 - Version 1.3.0

Improvement:

Please note: Downloadable only via the PCAN-Diag 2 package. This sorfware is not distributed individually.

Bug fix: While converting Enums from Symbol files, empty strings were not handled correctly

It is now possible to select a multiplexer display mode (common or separate) for a symbol file
Support for CAN ID mask of symbol files added
Bug fix: If the Windows themes had been disabled, the toolbars were not displayed correctly

Please note: The PCAN-Diag Editor version 1.2.0 requires the PCAN-Diag firmware version 1.7.0.

The tab order on the tab "CAN Transmit Lists" was corrected
Pre-selection of the first message of a transmit list, after selecting any desired list
When saving the project file, under circumstances the last changed value of a transmit list message was not saved if the edit mode of this value was not completed
The program icon in the Windows® taskbar was only displayed with 16x16 pixels
When entering the user bitrates names under Device Settings, more than 10 characters could be entered, although the PCAN-Diag can only display 10 characters. The number is now, by definition, limited to 10 characters
When entering the name of a transmit list, more than 20 characters could be entered, but then the input could not be taken. Now the input is limited to a maximum of 20 characters
On the "CAN Transmit Lists" tab, the context menu command "Rename" has been added in order to rename a transmit list
On the "CAN Transmit Lists" tab, a new value "Min. required cyle time" has been added
The layout on the "CAN Transmit Lists" tab has been changed due to the new value

When the library "PcanDiagHlp.dll" could not be loaded in the program, the transfer was displayed without a meaningful error message. The same message was also produced by the older version 1.0.0.15 of the library. This error has been corrected
Text corrections in the default file

Bug fix concerning reading the default file
Bug fix concerning reading the project files (particularly affected numbers which were displayed as hexadecimal values in the program)
Bug fix concerning an saving error, causing that, the last changed setting in the program was not saved

Error corrected that occurred when closing the program if it was started from the PCAN-Diag and the PCAN-Diag was removed from USB
New attribute "FileVersion" in the default file was added
When saving project files the following new values will be stored in the section "Version" : firmware version, file version and program version
New command "Device Info...." was added to the toolbar
Error corrected that occurred during the transfer when a transmitted symbol file could not be read for conversion
Correction in the version information of the library "PcanDiagHlp.dll" (1.0.2.18)
In the library "PcanDiagHlp.dll" (1.0.2.18) the new rules of the symbol format regarding the multiplexers in PCAN-Explorer versions 5.1.3 and higher were included

First official release version of PCAN-Diag Editor and the library for converting symbol files for the useage PCAN-Diag "PcanDiagHlp.dll" (1.0.1.17)