Ce site utilise des cookies à des fins d'analyse, de gestion de la connexion au site marchand, au forum et de traitement d’une commande. En continuant à naviguer sur ce site, vous acceptez cette utilisation. Vous trouverez des informations détaillées sur l'utilisation des cookies dans notre politique de confidentialité.

OK Confidentialité

PCAN-Gateway Software & Configuration Website - Version History

2019-08-01 - PCAN-Gateway software version 2.8.1

  • It is now possible to create up to 16 routes instead of 8
  • Active routes are now stopped before network settings are changed and started automatically after the changes are done
  • Several components such as PHP 7.3 have been updated for future improvements
  • The configuration ini file format was updated to version 1.4.1 due to the new CAN parameter "Enable_error_counter"

Website version 2.1.0

  • General change of the website header: The custom device name is now shown as the large header. The product name is now displayed before the device description if it is different from the product name
  • Improved Broadcast Scan: Enabled listing of the further gateway products
  • Improvements, changes, and bug fixes to the web design and documentation

JSON interface version 1.1.0

  • Added the new CAN properties can_errors_rx and can_errors_tx. They can be called via "get can" or "get can can_errors_rx can_errors_tx"
  • Added the new CAN property CAN_error_reporting. This number indicates if the error reporting for the CAN channel is active or inactive. If active, the values can_errors_rx and can_errors_tx are counted. This value is saved as "Enable_error_counter" in the config.ini file

2018-06-19 - PCAN-Gateway software version 2.7.0

Released with configuration website version 2.0.0

Improvements & Changes:

  • Added a formula to configure the JSON interface at the page Device >> Configuration. It includes four options:
    • Enable JSON Interface: To enable or disable the interface.
    • Enable Configuration: To enable configuration.
    • Enable Shell View: To enable access to the Shell view emulation for development and familiarization.
    • Respect Public Display: If active, the interface only can access elements that have been activated on the page Device » User Management in the Public Dashboard form.
  • If the JSON interface is enabled, a note is displayed in the Important Info Box of the website
  • The JSON Interface version is now listed on the page Device along with the other version numbers
  • Added the new route parameter "TCP connected" which is displayed on Manage Routes in Expert display mode
  • Enhanced the route status: Based on the parameter "TCP connected" active Send routes can now have the yellow status if they have no matching Receive route
  • Enhanced the validation of all settings due to the configuration via the JSON interface
  • Update of the product pictures due to an update of their labels
  • Switched the error handling of the website to error codes
  • Added the checkbox "Reset after Login" to the formula for the display mode at the page Device >> User Management. If disabled, the selected display mode is not reset to after a new login
  • Updated the website documentation concerning to the new functions and settings (JSON interface etc.)
  • Changed the default SSID to "PEAK Wireless Default"

Bug fixes:

  • When switching to UDP while creating a route, the field FPP is displayed. When switching back, it was not hidden correctly
  • CAN custom bit rate: If the calculated value was equal to the lower limit, the result was false and saving wasn't possible
  • CAN-Status: If Listen-Only is active, the status is now displayed as OK (green LED)
  • Broadcast scan now also works with Wireless Gateways running the µAP operation mode
  • Minor bug fixes

Added JSON Interface version 1.0.0:

  • Implementation of a JSON interface to enable a communication between custom software and the PCAN-Gateways for monitoring and configuration
  • When using the JSON interface, the request is passed as one of the following Get parameters. The parameter cmd expects a proprietary request. The parameter jcmd expects a JSON-formatted request
  • Added the command get for reading the status information and configuration
  • Added the command set for configuring the PCAN-Gateway
  • Added the command delete for deleting a route or filter
  • Added the command reset for resetting a CAN channel or a route
  • Added a Shell emulation for development and for an easy start in working with the JSON interface
  • Added a documentation for the JSON interface that can be invoked via the Shell view
  • Added the command help for displaying the help documentation (only for Shell view)

2017-04-18 - PCAN-Gateway software version 2.6.0

Released with configuration website version 1.9.0


  • CAN traffic isn’t required to reconnect outgoing TCP routes anymore. Reconnection attempts are forced after a defined delay
  • Improved the display of the route status. The information how many devices are connected to a receive route is now processed. If more than one is connected, a red LED is shown. The route would not work correctly in this case
  • TCP Delay, a property of Send routes is now indicated on the manage routes web page. It is displayed in Expert mode by default and in Normal mode only if it differs from its default value (active)
  • TCP Delay can be deactivated for Send routes in Expert mode
  • New file format of .ini (1.3.1) file where the new delay can be defined per route as "Cdm"
  • The port 45321 is reserved for the transmission of status information and is required perform the handshake between PCAN-Gateways. This information was added to the documentation and the port is now checked for this value when adding or editing a route
  • Improved the listing of filters for the pages Add Route and Edit Route. The filter term and the user notes, if available, are now displayed as well
  • Improved the listing of the CAN channels at the Add and Edit Route page. In addition to the channel number, the bit rate and user notes are displayed
  • User notes for routes with a max 125 characters are now available. You can enter them while creating or editing a route
  • User notes of routes are displayed at the page Manage Routes if they are defined
  • Info icons were added in the table rows on Manage Routes and Manage Filters. They appear if the route or filter has user notes. Hover the icon to display them as a tooltip


  • The default operation mode will be Micro Access Point in the future because Windows doesn’t support the connection to Ad-Hoc networks since version 8.1. Information about this has been added to the documentation as well
  • Manage Routes: Revision of the information displayed for each Route in Expert mode
  • If the character # is used for the SSID or Netkey it causes an error because that character isn’t allowed for this
  • Device > User Management: Also network interfaces that are not available are now listet in the Public Dashboard configuration. This change is required for coming features

Bug fixes:

  • Tooltips of checkboxes and radio buttons were not displayed
  • Bug fixes and improvements of the mobile presentation and the page presentation with deactivated JavaScript
  • Fixed a problem conecerning the usage of DHCP
  • Minor bug fixes and changes

2015-08-11 - PCAN-Gateway software version 2.5.1

Released with configuration website version 1.7.1


  • Range validation for the WLAN encryption key


  • Revision of the layout of the WLAN web page to enhance its usability
  • The broadcast scan duration was set to 10 seconds
  • Changed the time to change the IP address for WLAN devices to 15 sec

Bug fixes:

  • Only WLAN devices: The IP address could not be changed when running the µAP operation mode
  • It was possible to create 8 routes but the last one was deleted after a reboot
  • The user name at the login page can now be saved by the browser
  • Various minor bug fixes and updates concerning layout and text


2015-06-12 - PCAN-Gateway software version 2.5.0

Released with configuration website version 1.7.0

Please note: This Version includes all the changes since website version 1.5.0.


  • Added the section Filters. The top level page shows general information about filters
  • Added the common filter information at the Status and the Login page. The visibility at the Login page can be disabled
  • Added the page Manage Filters. The existing filters are listed with their basic information and control options
  • Added the page Add Filter. This page is used to add or edit a Range or Mask filter
  • Added a new step for creating Send routes. With the Filter step, you can attach or detach a filter to a route. Multiple in Expert mode
  • Multiple Filters can be joined by logical AND or logical OR
  • Attached filters are now shown on the page Manage Routes
  • The new WLAN operation mode µAP is now available. But please note: The Network Scan function is not available while running this mode
  • The INI file format has changed to version 1.3 and includes the final Filter parameters now
  • Enhanced performance for page loading


  • The way Range filters work has changed. They are now made of multiple Mask filters and cover the defined range exactly
  • Due to the new INI format the designation of the filter parameters has changed. Old configurations will be updated but filters that were created with the new version will get lost when downgrading to an old software package
  • Overlapping filters should now work without any problems
  • Routes as well as filters are now shown with their index. This is a unique identification number
  • Manages Routes shows detailed information in normal user mode as well
  • The WLAN operation mode is now shown in the general information box
  • More detailed CAN state description texts
  • Revision of the checkbox and radio button design
  • Various layout changes to make the information more readable and accessible
  • Updated the website documentation including
  • Added a new help page for the new Filters section
  • Help buttons won't open the help in pop-ups anymore because this caused display problems on mobile devices and some further problems. The page will now be opened in a common tap

Bug fixes:

  • Revision layout for enhanced browser and mobile device support
  • Various minor bug fixes


2015-03-17 - PCAN-Gateway software version 2.4.2

Only changes for the software version concerning the
PCAN-Wireless Gateway and PCAN-Wireless Gateway DR.

  • Bug fix: In rare cases WLAN packets could get corrupted or lost


2014-07-25 - PCAN-Gateway software version 2.4.0

Released with configuration website version 1.5.0

On the page Network >> WLAN:

  • Added a new form to select the WLAN operation mode. After the first configuration Infrastructure mode (connect as a Client) was active by default. With the new form you can switch back to the Ad-Hoc mode (provide a network as a Host) or keep it active after the initialization
  • The encryption type WEP is no longer available due to security issues

General Improvements:

  • Help pages were added. You can access them via the new main menu entry "Help" or via the question mark icon on the other pages. You can open the corresponding help page in that case
  • The web design of version 1.4 of the configuration website was improved. A flexible layout and advanced tooltips were implemented for usage on mobile devices

Bug fixes:

  • User defined Subnet masks are now processed correctly. They were replaced by a default Subnet mask in previous versions
  • Sub-page titles are now displayed correctly


2014-04-01 - PCAN-Gateway software version 2.3.13

Released with configuration website version 1.3.1

On the page Network >> CAN (in Expert user mode):

  • CAN channels can now be activated and deactivated
  • Custom bit rates can now be defined. This comes along with a live validation of the entered values and a pre calculation of the resulting bit rate
  • Extensive information about the current configuration is displayed for each CAN channel


  • On the page Network >> CAN: The bit rate selection only offers values depending on the limits of the CAN transceiver
  • On the pages Device >> Software Update and Device >> Configuration the file upload buttons are now disabled as long as no file is selected
  • Minor adjustments for mobile web layout


2014-01-27 - Configuration website version 1.2.0

Adjustments for the PCAN-Wireless Gateways that were released with this version ...

  • Added the Auto Power Off function on the page Device >> Configuration


  • Added new product pictures for the whole PCAN-Gateway product family
  • On the page Network >> CAN: For each CAN channel the setting manual bit rate is now displayed in Expert user mode

Bug fixes:

  • A incorrect error message was displayed if the user session was lost after a reset


2013-12-16 - Configuration website version 1.1.0

Adjustments for the PCAN-Wireless Gateways DR that were released with this version ...

  • Added a new page: Network >> WLAN Networks Scan that shows all available WLAN networks with name (SSID), encryption, and signal level. A single network can be selected for connecting your device. For this, the information is transferred to the WLAN configuration web page
  • All encryption types (including WEP as well as no encryption) can now be selected on the WLAN configuration page
  • A warning box is displayed on the bottom of the navigation if an unsecure encryption is used for the WLAN connection
  • WLAN region codes (USA, Canada, EU, and Japan) can be set


  • The reboot time was increased to 40 to make sure that the device is ready for new requests
  • Drop Downs have a highlight if they get the focus (via the Tab button for example)

Bug fixes:

  • Login credentials with HTML special characters caused problems
  • On the page Routes >> Add Route and Routes >> Edit Route the selection IP Address Source also appeared after a Broadcast Scan where no other PCAN-Gateways were discovered
  • Minor text and bug fixes