PCAN-MicroMod FD ECU

The PCAN-MicroMod FD ECU is a universal control unit for the integration of custom accessories in automotive applications. For this purpose, it provides a CAN FD connection as well as a mix of analog and digital I/Os. With its tough casing and two automotive connectors, it is designed for use in utility and heavy duty vehicles under harsh conditions.

PCAN-MicroMod FD products are configured with a free Windows® software. In addition to simply mapping I/Os to CAN IDs, function blocks for processing the data are also available. The configuration created on the computer is transferred via the CAN bus to the PCAN-MicroMod FD which then runs as an autonomous CAN node.

Requirements

The configuration requires a PEAK CAN interface.

• Module with integrated PCAN-MicroMod FD
• High-speed CAN connection (ISO 11898-2)
  
  • Complies with CAN specifications 2.0 A/B and FD
  • CAN FD bit rates for the data field (64 bytes max.) from 40 kbit/s up to 10 Mbit/s
  • CAN bit rates from 40 kbit/s up to 1 Mbit/s
• Wake-up by CAN bus or by separate input
• 4 digital inputs
  
  • Pull-up or pull-down configurable
• 8 digital outputs with High-side switches
  
  • 2 outputs with 5 A and 6 outputs with 2 A
  • 4 alternatively usable as a digital input or additionally for reading back the output level
• 8 analog inputs
  
  • Resolution 16 bit
  • Measuring range adjustable: ±2.5 V, ±5 V, ±10 V, ±20 V
• 4 of the analog inputs alternatively usable as analog output
  
  • Resolution 12 bit
  • Voltage range adjustable: 0 to 5 V or 0 to 10 V
• 2 frequency outputs
  
  • Low-side switches (3 A)
  • Adjustable frequency range from 0 to 20 kHz
  • Alternatively usable as analog inputs with voltage range from 0 to 60 V
• Connections for CAN, I/O, and power supply via two 20-pole automotive connectors (Molex MX150)
• Plastic casing with increased Ingress Protection IP67 and flange
• Operating voltage 8 to 32 V; suitable for use in 12 and 24 V vehicle electrical systems
• Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)
• E1 type approval

• PCAN-MicroMod FD ECU including mating connectors (Molex MX150 A 33472-2001 black and Molex MX150 B 33472-2002 light gray)
• PCAN-MicroMod FD Configuration for Windows® Details ...
• Manual in PDF format
  
  

Requirements

• The configuration requires a PEAK CAN interface
  
  

Note

• Version with galvanic isolation of the CAN channel on request

Additional information

• PCAN-MicroMod FD: Firmware version history
• PCAN-MicroMod FD Configuration: Product page
• PCAN-MicroMod FD Configuration: Version history
• PEAK-System Forum: Section for the PCAN-MicroMod FD ECU for questions and support
• The standard CAN FD: Support and compatible products
  
  

Accessories

• PCAN-MicroMod FD ECU Adapter (IPEH-003086)