PCAN-MicroMod Mix 1 & 2
Application-specific PCAN-MicroMod Motherboards

PCAN-MicroMod Mix 1
IPEH-002202 € 196,00
PCAN-MicroMod Mix 2
IPEH-002203 € 196,00

All prices are plus the at present valid value added tax!

Description

The motherboards for the PCAN-MicroMod provide an application-oriented environment. Typical characteristics of this product group include a wide supply voltage range and the protective circuit for the inputs and outputs. CANopen® firmware is available for all PCAN-MicroMod motherboards.

The Mix 1 and Mix 2 motherboards combine general analog and digital requirements with temperature recording functions.

Requirements:


The configuration requires a PEAK CAN interface.

Technical Specifications

Specifications Mix 1


  • High-speed CAN connection (ISO 11898-2)
    • Bit rates from 10 kbit/s up to 1 Mbit/s
    • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • Completely configurable using the Windows® software PCAN-MicroMod Configuration
  • Operating voltage 8 to 26 V
  • Status LEDs for power supply and digital output
  • Aluminum casing with spring terminal connectors. Optional DIN rail fixing available
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
  • 2 analog inputs:
    • Measuring range unipolar 0 to 5 V
    • Resolution 10 bit, sample rate 1 kHz
    • Measuring range extension optional
    • Pull-down circuit
    • Protection against under- and overvoltages
  • 2 temperature inputs:
    • 2 connections for NTC resistors (type EC95F103W)
    • Measuring range 0 to 70 °C (32 to 158 °F)
  • 6 digital inputs:
    • Pull-up or pull-down circuit selectable in groups (3 groups)
    • Schmitt trigger behavior, inverting
    • Threshold High = 4.8 V, Low = 1.2 V
    • Low-pass behavior
    • Parallel connection of frequency inputs at 4 digital inputs for alternative use (e.g. on rapid state changes, counting)
  • 2 digital outputs/frequency outputs:
    • Fast Low-side switch, max. 55 V, 0.75 A
    • Short-circuit protection

 

Specifications Mix 2


  • High-speed CAN connection (ISO 11898-2)
    • Bit rates from 10 kbit/s up to 1 Mbit/s
    • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • Completely configurable using the Windows® software PCAN-MicroMod Configuration
  • Operating voltage 11 to 26 V
  • Status LEDs for power supply and digital output
  • Aluminum casing with spring terminal connectors. Optional DIN rail fixing available
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
  • 3 analog inputs:
    • Measuring range unipolar 0 to 4.1 V
    • Resolution 10 bit, sample rate 1 kHz
    • Measuring range extension optional
    • Pull-down circuit
    • Low-pass behavior
    • Protection against under- and overvoltages
  • 1 analog voltage output:
    • Voltage 0 to 10 V (based on 16-bit PWM)
    • Load ability 15 mA, short-circuit proof
  • 1 analog current output:
    • Current intensity 0 to 20 mA (based on 16-bit PWM)
  • 2 digital inputs:
    • Pull-up or pull-down circuit selectable for both together (1 group)
    • Schmitt trigger behavior, inverting
    • Threshold High = 4.8 V, Low = 1.2 V
    • Low-pass behavior
    • Parallel connection of a frequency input each for alternative use (e.g. on rapid state changes, counting)
  • 1 digital output:
    • Fast Low-side switch, max. 55 V, 0.75 A
    • Short-circuit protection
  • 2 temperature inputs:
    • 1 connection for a NTC resistor (type EC95F103W)
    • 1 connection for a platinum sensor PT1000
    • Measuring range 0 to 70 °C (32 to 158 °F)

 

 

Scope of supply

  • PCAN-MicroMod
  • PCAN-MicroMod motherboard in casing including mating connectors
  • PCAN-MicroMod Configuration Software for Windows® Details ...
  • Manual in PDF format

CANopen® firmware is available for all PCAN-MicroMod motherboards.

Requirements:

  • The configuration requires a PEAK CAN interface

Downloads

PCAN-MicroMod package

Package for PCAN-MicroMod, PCAN-MicroMod Evaluation board, and the PCAN-MicroMod motherboards. The package includes the configuration software PCAN-MicroMod Configuration for Windows®, the latest PCAN-MicroMod and the CANopen® firmware, all files for development, and documentation (German and English).

PCAN-MicroMod Mix 1 manual

PCAN-MicroMod Mix 2 manual

PCAN-MicroMod CANopen® firmware manual

PCAN-MicroMod Configuration

PCAN-MicroMod Configuration software for Windows®

More

Additional information on other pages:

PCAN-MicroMod Configuration version history
PEAK-System Forum: Section for the PCAN-MicroMod for questions and support

 

This website uses cookies for analytics, for logins to the online shop and the forum, and for the handling of an order. By browsing this website you agree to the use of cookies. Detailed information on their use can be found in our privacy policy.