PCAN-MiniDisplay

The PCAN-MiniDisplay is used as a human-machine interface for the visualization of CAN data. For the connection to the CAN bus, it has two High-speed CAN connectors. The graphic representation of incoming CAN data is configured before using the unit and then is performed on a TFT display.

The PCAN-MiniDisplay can alternatively be used for data logging. The data traffic is recorded to a memory card and can be replayed or analyzed on a PC later on.

In addition to the built-in PCAN-MiniDisplay, there is a version in plastic casing with push buttons available. This can be used to create and evaluate application-specific configurations. Furthermore, the user can directly switch between different configurations during operation.

Note

Running a display configuration as well as recording and playback of CAN messages is not possible at the same time. The PCAN-MiniDisplay can only be used with one of the three functions.

• CAN connections via two High-speed CAN channels (ISO 11898-2)
  
  • Bit rates from 40 kbit/s up to 1 Mbit/s
  • Complies with CAN specifications 2.0 A/B
  • NXP TJA1041 CAN transceiver with wake-up
• 2 analog inputs
  
  • Resolution 10 bit
  • Measuring range 0 to 16.5 V
• 1 digital input and 1 digital output
• TFT display with 320 x 240 pixel resolution
• Freely configurable visualization of CAN data via text files
  
  • Display of texts, CAN data as well as the values of the analog and digital inputs via text labels
  • Formattable output of CAN data as numbers, float numbers, or strings with consideration of enums and multiplexers
  • Display of bitmap images with transparency
  • Signal-dependent display of image lists
  • Presentation of multiple signal curves in plotters
  • Configurable access to key and buzzer functions as well as display brightness via CAN
  • Transmitting CAN frame sequences at the start, operation, and end of a configuration
• Slot for microSD memory card (max. 32 GByte)
• High-speed ​​USB 2.0 port for access to the memory card using a PC
• Running configurations from the memory card
• Optional auto-start of a single configuration or recording on power-up
• Recording of incoming CAN messages to the internal memory card, optionally including occurring errors
• CAN ID filtering for recordings, separately configurable for each CAN channel
• Conversion of recordings to various output formats using Windows software
• Playback of a recording with optional loop function
• Use of optionally equipped push buttons for menu navigation and to switch between multiple display configurations
• Dimensions: 80 x 55 mm
• Voltage supply from 7 to 30 V
• Operating temperature range from -20 to +70 °C (-4 to +158 °F)
  
  

Optionally available PCAN-MiniDisplay Case

• Device in plastic casing with 3 push buttons
• Connections via terminal blocks (Phoenix)

Scope of supply PCAN-MiniDisplay

• PCAN-MiniDisplay with mounting frame
• Cables for power supply, CAN, and digital inputs
• 512 MB memory card installed
• Conversion software PEAK-Converter for Windows® Details ...
• Configuration examples
• Manual in PDF format
  
  

Scope of supply PCAN-MiniDisplay Case

• PCAN-MiniDisplay in plastic casing including mating connectors (Phoenix Contact FMC 1,5/4-ST-3,5 - 1952283 & Phoenix Contact FMC 1,5/10-ST-3,5 - 1952348)
• 512 MB memory card installed
• Conversion software PEAK-Converter for Windows® Details ...
• Configuration examples
• Manual in PDF format

Additional information

• PCAN-MiniDisplay: Firmware version history
• PEAK-System Forum: Section for the PCAN-MiniDisplay for questions and support