Ce site utilise des cookies à des fins d'analyse, de gestion de la connexion au site marchand, au forum et de traitement d’une commande. En continuant à naviguer sur ce site, vous acceptez cette utilisation. Vous trouverez des informations détaillées sur l'utilisation des cookies dans notre politique de confidentialité.

OK Confidentialité

PCAN-MiniDisplay - Version History

2018-05-24 - Version 1.3.2

  • Bug fix: Tracer settings (type of trace) were not stored correctly, therfore automatic trace start after power-on did not capture the desired data.

2017-12-07 - Version 1.3.1

  • Added a new option to the device settings to swap the display orientation (0°/180°)
  • Added a new feature: Scenes can now transmit CAN frame sequences. For this there are 3 types of transmit lists: init list, cyclic list, and exit list

2017-07-28 - Version 1.2.3

  • The transparency parameter of instruments can now be set to 2 which enables a recalculation of overlapping transparent instruments

2017-06-17 - Version 1.2.1

Important note:

Older PCAN MiniDisplays without casing (IPEH-002262, before serial number 150) and casing (IPEH-002262-KSM01, before serial number 12215) must be updated to the firmware 1.1.7 before they can be updated to firmware 1.2.1 or higher.

  • Several changes in Device Settings due to the new hardware version and to increase the readability

2017-06-19 - Version 1.1.7


  • In addition to decimal, the parameter muxvalue of instruments can be defined in hexadecimal
  • Added a new tracer option to set a shutdown time (Tracer timeout) in case no error/data is received for this time
  • Added display dimming with timeout

Bug fixes:

  • Bitrate detection was not working correctly since version 1.1.3
  • The playing back traces with channel 2 was not working
  • Fixed reset of CAN channel 2

2016-11-04 - Version 1.1.5


  • Added logging and playback support
  • The log file size can be selected by user now
  • The information to be logged can be chosen by the user (error, data, or error and data)
  • New for instrument panels: Possibility to use multiplexed CAN signals
  • New for instrument panels: if a signal of a label has a timeout, a special timeout string can be displayed

2015-06-22 - Version 1.1.2


  • Added help files
  • When an instrument file is quit, the system returns to the Instrument Selection menu instead of the Main menu

Bug fixes:

  • Displaying Bitmaps did not work since version 1.1.0
  • The plotter draws one horizontal line out of its range

2015-05-28 - Version 1.1.0

Bug fixes:

  • Depending on the memory card type, access to the memory card might fail
  • The CAN filter could be set incorrectly after enter/exit the Device Settings menu
  • Shutdown did not always work

Firmware updates prior to product release ...