We use cookies on our website to provide you with the best possible service and to further improve our website. By clicking the "Accept All" button, you agree to the use of all cookies. You can limit the cookies used by clicking on "Accept selection". Further information and an option to revoke your selection can be found in our privacy policy.

Necessary:

These cookies are necessary for basic functionality. This allows you to register on our website and forum or order products with our online shop.

Statistics:

With these cookies, we collect anonymized usage data for our website. For example, we can see which content is interesting for our visitors and which resolutions are used. We use the information to optimize our website to provide you with the best possible user experience.

Necessary
Statistics

show more

PCAN-PC/104

CAN Interface for PC/104

PCAN-PC/104 Dual Channel
IPEH-002055 € 155,00
PCAN-PC/104 Single Channel opto-decoupled
IPEH-002056 € 175,00
PCAN-PC/104 Dual Channel opto-decoupled
IPEH-002057 € 205,00

All prices are plus the at present valid value added tax!

Stock information

  • IPEH-002055 - PCAN-PC/104 Dual Channel – Out of stock!
  • IPEH-002056 - PCAN-PC/104 Single Channel opto-decoupled – Out of stock!

We gladly accept pre-orders. Please note our information about the delivery situation.

The PCAN-PC/104 card enables the connection of one or two CAN networks to a PC/104 system. Multiple PCAN-PC/104 cards can easily be operated using interrupt sharing.

The card is available as a single or dual-channel version. The opto-decoupled versions also guarantee galvanic isolation of up to 500 Volts between the PC and the CAN sides.

The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.

Please note


The product PCAN-PC/104 Single Channel (IPEH-002054) is no longer manufactured! Alternatively, the PCAN-PC/104 Single Channel opto-decoupled (IPEH-002056) can be used, since it behaves identically concerning the CAN functionality.

If a minimum quantity is requested, we will manufacture the product on your behalf. Please contact our sales department for further information.

Pin assignment D-Sub

1 Not connected / optional +5 V
2 CAN-L
3 GND
6 GND
7 CAN-H
9 Not connected / optional +5 V
  • Form factor PC/104
  • Multiple PC/104 cards can be operated in parallel (interrupt sharing)
  • 14 port and 8 interrupt addresses are available for configuration using jumpers
  • 1 or 2 High-speed CAN channels (ISO 11898-2)
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • Connection to CAN bus through D-Sub slot bracket, 9-pin (in accordance with CiA® 106)
  • NXP SJA1000 CAN controller, 16 MHz clock frequency
  • NXP PCA82C251 CAN transceiver
  • 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
  • Galvanic isolation on the CAN connection up to 500 V, separate for each CAN channel (only for IPEH-002056 and IPEH-002057)
  • Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)
  • PCAN-PC/104 card
  • Slot bracket with D-Sub connectors for the CAN bus
  • Device drivers for Windows® 10 (x86) and Linux
  • CAN monitor PCAN-View for Windows® Details ...
  • CAN monitor PCAN-View for DOS
  • Programming interface PCAN-Basic for developing applications with CAN connection Details ...
  • Programming interfaces for standardized protocols from the automotive sector
  • Manual in PDF format

Legacy device driver setup for Windows

PEAK-System installation package for 32-bit Non-Plug-and-Play drivers for PCAN-PC/104, PCAN-ISA, and PCAN-Dongle (parallel port) as well as a 32/64-bit Plug-and-Play driver for PCAN-PC Card for Windows® 10 (x86/x64).

Download

Device driver for Linux

Device drivers for PEAK CAN interfaces running on Kernel 2.6 and higher.

Website

PCAN-PC/104 manual

German English

PCAN-View

Software for displaying, transmitting, and recording CAN and CAN FD messages for Windows® 11 (x64/ARM64), 10 (x86/x64).

Please note: PCAN-View is a part of our device driver setup.

Download

PCAN-Basic API

API for the development of applications with CAN and CAN FD connections for Windows® 11 (x64/ARM64), 10 (x64).

Download

PCAN-Basic API (Linux)

API for the development of applications with CAN connection for Linux.

Download

PCAN-Basic.NET Assembly

The PCAN-Basic.NET Assembly is available as a package in the NuGet Gallery. The online documentation is available on our website.

Documentation NuGet Gallery

PCAN-CCP API

API for the development of software for the communication with ECUs according to the CAN Calibration Protocol (CCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).

Download

PCAN-XCP API

API for the development of software for the communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).

Download

PCAN-ISO-TP API

API for the transfer of data packages according to ISO-TP (ISO 15765-2) for Windows® 11 (x64/ARM64), 10 (x64).

Download

PCAN-UDS API

API to communicate with control devices according to UDS (ISO 14229-1) for Windows® 11 (x64/ARM64), 10 (x64).

Download

PCAN-OBD-2 API

API for the vehicle diagnostics according to OBD-2 (ISO 15765-4) for Windows® 11 (x64/ARM64), 10 (x64).

Download

PCAN-PassThru API

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces. Installation for Windows® 11 (x64/ARM64), 10 (x64) includes interface DLLs, a configuration software, and the PCAN-ISO-TP API. The download also contains the documentation (English).

Download

Additional information

Suitable to be used with