This website uses cookies for analytics, for logins to the online shop and the forum, and for the handling of an order. By browsing this website you agree to the use of cookies. Detailed information on their use can be found in our privacy policy.

OK Privacy Policy

PCAN-PCI/104-Express

CAN Interface for PCI/104-Express

PCAN-PCI/104-Express Single Channel
IPEH-003054 € 210,00
PCAN-PCI/104-Express Single Ch. opto-decoupled
IPEH-003056 € 260,00
PCAN-PCI/104-Express Dual Ch. opto-decoupled
IPEH-003057 € 355,00

All prices are plus the at present valid value added tax!

The PCAN-PCI/104-Express card enables the connection of one, two, or four CAN busses to a PCI/104-Express system. Up to four cards can be stacked together. The CAN bus is connected using a 9-pin D-Sub plug on the slot brackets supplied. There is galvanic isolation of up to 500 Volts between the computer and CAN sides. There are versions with one, two and four channels.

The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.

Please note:


The product PCAN-PCI/104-Express Quad opto-decoupled (IPEH-003058) is no longer manufactured! Alternatively, the PCAN-PCI/104-Express FD Four Channel (IPEH-004082) can be used, since it behaves identically concerning the CAN functionality.

Pin assignment D-Sub

Pin Pin assignment
1 Not connected
2 CAN-L
3 GND
4 Not connected
5 Not connected
6 GND
7 CAN-H
8 Not connected
9 Not connected / optional +5V
  • PCI/104-Express card, 1 lane (x1)
  • Form factor PC/104
  • Up to four cards can be used in one system
  • 1, 2, or 4 High-speed CAN channels
    (ISO 11898-2)
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • Connection to CAN bus through D-Sub slot bracket, 9-pin (in accordance with CiA® 303-1)
  • FPGA implementation of the CAN controller (SJA1000 compatible)
  • NXP PCA82C251 CAN transceiver
  • Galvanic isolation on the CAN connection up to
    500 V, separate for each CAN channel
  • Supplied only via the 5 V line
  • 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
  • Optionally available: PCI-104 stack-through connector
  • PCAN-PCI/104-Express card
  • Slot bracket with D-Sub connector(s) for the CAN bus (two for the four-channel version)
  • Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
  • CAN monitor PCAN-View for Windows® Details ...
  • Programming interface PCAN-Basic for developing applications with CAN connection Details ...
  • Programming interfaces for standardized protocols from the automotive sector
  • Manual in PDF format

Device driver setup for Windows

Download

PEAK-System installation package for device drivers and tools for Windows® 10, 8.1, 7 (32/64-bit) for our PC interfaces.

Device driver for Linux

Website

Device drivers for PEAK CAN interfaces from Kernel 2.4 and higher.

PCAN-PC/104-Express manual

German English

PCAN-View

Download

Windows® software for displaying, transmitting, and recording CAN and CAN FD messages.

PCAN-Basic API

Download

API for the development of applications with CAN and CAN FD connections for Windows® 10, 8.1, 7 (32/64-Bit)

PCAN-Basic API (Linux)

Download

API for the development of applications with CAN connection for Linux

PCAN-CCP API

Download

API for the development of software for the communication with ECUs according to the CAN Calibration Protocol (CCP)

PCAN-XCP API

Download

API for the development of software for the communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP)

PCAN-ISO-TP API

Download

API for the transfer of data packages according to ISO-TP (ISO 15765-2)

PCAN-UDS API

Download

API to communicate with control devices according to UDS (ISO 14229-1)

PCAN-OBD-2 API

Download

API for the vehicle diagnostics according to OBD-2 (ISO 15765-4)

PCAN-PassThru API

Download

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces. Installation for Windows® 10, 8.1, 7 (32/64-bit) includes interface DLLs, a configuration software, the PCAN-Basic API, and the PCAN-ISO-TP API. The download also contains the documentation (English).

Windows 2000 package

Download

Device drivers for Windows® 2000 and the CAN monitor PCAN-View.

BaudTool

Download

Windows® software for calculating the BTR0/BTR1 baud rate register

Additional information on other pages

PEAK-System Forum: Section for the PCAN-PCI/104-Express card for questions and support
CAN device driver 4.x version history

Suitable to be used with

PCI-Express-PCIe/104 Adapter: Test interface for PCIe/104 cards