Nous utilisons des cookies sur notre site web afin de vous fournir le meilleur service possible et d'améliorer encore notre site web. En cliquant sur le bouton "Accepter tout", vous acceptez l'utilisation de tous les cookies. Vous pouvez limiter les cookies utilisés en cliquant sur "Accepter la sélection". Vous trouverez de plus amples informations et une option pour révoquer votre sélection dans notre politique de confidentialité.

Nécessaire :

Ces cookies sont nécessaires pour la fonctionnalité de base. Cela vous permet de vous inscrire sur notre site web et notre forum ou de commander des produits avec notre boutique en ligne.

Statistiques :

Avec ces cookies, nous collectons des données d'utilisation anonymisées pour notre site web. Par exemple, nous pouvons voir quel contenu est intéressant pour nos visiteurs et quelles résolutions sont utilisées. Nous utilisons ces informations pour optimiser notre site web et vous offrir la meilleure expérience utilisateur possible.

Nécessaire
Statistiques

plus

PCAN-Router Pro - Firmware Version History

2020-03-13 - Version 1.15.1

  • If a message gateway triggered a function block which contained a conditional statement, this condition was always true
  • Improvement: A message gateway did trigger a function block only when mode was set to "message trigger". Now the trigger is also valid if the mode is set to "direct copy"


PEAK-Flash tool with embedded firmware file

2019-11-19 - Version 1.15.0

Bug fixes:

  • Clear CF-card did not work correctly when is was done using a "default value" (at startup of the module) and the card was already full

2018-06-08 - Version 1.14.4

Improvements:

  • Added "MaxSectorsToWrite" variable for CF trace

Bug fixes:

  • The internal hashkey calculation from CAN ID lead to an index outside of the corresponding data array. This could cause problems with the memory or processor crashes
  • Routing tables were not processed correctly        
  • Fixed CAN_SetTransceiverMode() for HS8_GE. Listen-only was not possible

2015-06-01 - Version 1.14

Changes:

  • Number of transmit messages increased from 120 to 350
  • Number of data objects increased from 257 to 1272

Bug fix:

  • Number of data objects that were saved to EEPROM was limited to 127

2015-03-31 - Version 1.13

New features:

  • Multiplexer option for CAN variables added
  • Scale/Offset calculation order can be swapped for transmit messages (make it compatible to PCAN-Explorer behavior)

2014-10-10 - Version 1.12

  • Adjusted the Timing parameter for XMORE-CF-Cards

Bug fixes:

  • Timeout of Selfhold signal freezed the Router Pro
  • Fixed a problem with the Sleep-mode of the TH8056 transceiver (Single-wire)
  • Concerning "Routing x to y, ex..." CAN-IDs are now limited to 2047. It was possible to enter higher values but this leads to a system freeze
  • Trace Clear was deactivated completely

2013-04-03 - Version 1.9

Improved device resources: 

  • Receive messages quantity set from 50 to 120
  • Transmit messages quantity set from 50 to 120
  • Gateway messages quantity set from 50 to 120
  • Defaults quantity set from 50 to 500
  • Characteristic Curves quantity set from 10 to 20              

Bug fixes:

  • Enhanced error management concerning the CF card interaction
  • Trace Clear is now inactive by default 
  • Logging Error Frames is now inactive by default
  • Improved error management when the resources are exhausted

Please note: This version also includes the changes of revision 1.8.

2011-12-07 - Version 1.7

New configuration features:

  • Logging of error frames is now switchable for each CAN channel
  • Suppression of the configuration ID 7E7h is now switchable for each CAN channel

Bug Fix:

  • Function block "hysteresis" now has a 5.th parameter "start mode"

Attention: Both features require an update of the PPCAN-Editor hardware profile. This profile is delivered with the PPCAN-Editor from version 2.0.4

2011-10-11 - Version 1.6

Improvements:

  • Logging of CAN error frames. Attention: This feature requires a PEAK-Converter (PCAN-Trace Converter) from version 1.9.0
  • Number of logging sessions is no longer limited to 16. Attention: This feature requires a PEAK-Converter (PCAN-Trace Converter) from version 1.9.0

Bug fix:

  • Warning when exceeding hardware's resource limits. Attention: this feature requires a PPCAN-Editor 2 from version 2.0.3

2011-05-19 - Version 1.5

  • Bug fix: Erroneous configuration may permanently block the device
  • Added: "Route X to Y, all" can now be switched during runtime
  • Changed device's resources: 
    • Characteristic Curves quantity set from  2 to 10 
    • Function Blocks quantity set from 50 to 120

2010-10-18 - Version 1.4

  • Bug fix: Code incomplete for CAN channel 5 (CF card) (incl. extension of PEAK-Converter to 16 channels)
  • Bug fix: Error when writing to EEPROM beyond 64 MB
  • Changed device's resources:
    • Receive messages quantity set from 35 to 50
    • Transmit messages quantity set from 35 to 50
    • Limits set from 10 to 5
    • Strings set from 5 to 2

2010-06-10 - Version 1.3

  • Added listen-only mode

2010-04-20 - Version 1.2

  • Various bug fixes
  • First official release

2010-03-25 - Version 1.1

  • Added new functions: real-time clock, beeper, and TJA1041 support

Version 1.0          

  • Prototype release