This website uses cookies for analytics, for logins to the online shop and the forum, and for the handling of an order. By browsing this website you agree to the use of cookies. Detailed information on their use can be found in our privacy policy.

OK Privacy Policy

PCAN-Router Pro - Firmware version history

01.06.2015 - Version 1.14

Changes:

  • Number of transmit messages increased from 120 to 350
  • Number of data objects increased from 257 to 1272

Bug fix:

  • Number of data objects that were saved to EEPROM was limited to 127



31.03.2015 - Version 1.13

New features:

  • Multiplexer option for CAN variables added
  • Scale/Offset calculation order can be swapped for transmit messages (make it compatible to PCAN-Explorer behavior)



10.10.2014 - Version 1.12

  • Adjusted the Timing parameter for XMORE-CF-Cards

Bug fixes:

  • Timeout of Selfhold signal freezed the Router Pro
  • Fixed a problem with the Sleep-mode of the TH8056 transceiver (Single-wire)
  • Concerning "Routing x to y, ex..." CAN-IDs are now limited to 2047. It was possible to enter higher values but this leads to a system freeze
  • Trace Clear was deactivated completely



03.04.2013 - Version 1.9

Improved device resources: 

  • Receive messages quantity set from 50 to 120
  • Transmit messages quantity set from 50 to 120
  • Gateway messages quantity set from 50 to 120
  • Defaults quantity set from 50 to 500
  • Characteristic Curves quantity set from 10 to 20              

Bug fixes:

  • Enhanced error management concerning the CF card interaction
  • Trace Clear is now inactive by default 
  • Logging Error Frames is now inactive by default
  • Improved error management when the resources are exhausted

Please note: This version also includes the changes of revision 1.8.


07.12.2011 - Version 1.7

New configuration features:

  • Logging of error frames is now switchable for each CAN channel
  • Suppression of the configuration ID 7E7h is now switchable for each CAN channel

Bug Fix:

  • Function block "hysteresis" now has a 5.th parameter "start mode"

Attention: Both features require an update of the PPCAN-Editor hardware profile. This profile is delivered with the PPCAN-Editor from version 2.0.4

 


11.10.2011 - Version 1.6

Improvements:

  • Logging of CAN error frames. Attention: This feature requires a PEAK-Converter (PCAN-Trace Converter) from version 1.9.0
  • Number of logging sessions is no longer limited to 16. Attention: This feature requires a PEAK-Converter (PCAN-Trace Converter) from version 1.9.0

Bug fix:

  • Warning when exceeding hardware's resource limits. Attention: this feature requires a PPCAN-Editor 2 from version 2.0.3

 


19.05.2011 - Version 1.5

  • Bug fix: Erroneous configuration may permanently block the device
  • Added: "Route X to Y, all" can now be switched during runtime
  • Changed device's resources: 
    • Characteristic Curves quantity set from  2 to 10 
    • Function Blocks quantity set from 50 to 120

 


18.10.2010 - Version 1.4

  • Bug fix: Code incomplete for CAN channel 5 (CF card) (incl. extension of PEAK-Converter to 16 channels)
  • Bug fix: Error when writing to EEPROM beyond 64 MB
  • Changed device's resources:
    • Receive messages quantity set from 35 to 50
    • Transmit messages quantity set from 35 to 50
    • Limits set from 10 to 5
    • Strings set from 5 to 2

 


10.06.2010 - Version 1.3

  • Added listen-only mode

 


20.04.2010 - Version 1.2

  • Various bug fixes
  • First official release

 


25.03.2010 - Version 1.1

  • Added new functions: real-time clock, beeper, and TJA1041 support

 


Version 1.0          

  • Prototype release