This website uses cookies for analytics, for logins to the online shop and the forum, and for the handling of an order. By browsing this website you agree to the use of cookies. Detailed information on their use can be found in our privacy policy.

OK Privacy Policy

PCAN-USB

CAN Interface for USB

PCAN-USB
IPEH-002021 € 180,00
PCAN-USB opto-decoupled
IPEH-002022 € 220,00

All prices are plus the at present valid value added tax!

The PCAN-USB adapter enables simple connection to CAN networks. Its compact plastic casing makes it suitable for mobile applications.

The opto-decoupled version guarantees galvanic isolation of up to 500 Volts between the PC and the CAN side.

The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.

Pin assignment D-Sub

Pin Pin assignment
1 Not connected / optional +5V
2 CAN-L
3 GND
4 Not connected
5 Not connected
6 GND
7 CAN-H
8 Not connected
9 Not connected / optional +5V
  • Adapter for the USB connection (Full-Speed mode, compatible with USB 1.1, USB 2.0, and USB 3.0)
  • High-speed CAN connection (ISO 11898-2)
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • Time stamp resolution approx. 42 µs
  • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • CAN bus connection via D-Sub, 9-pin
    (in accordance with CiA® 303-1)
  • NXP SJA1000 CAN controller, 16 MHz clock frequency
  • NXP PCA82C251 CAN transceiver
  • 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
  • Galvanic isolation on the CAN connection up to 500 V (only for IPEH-002022)
  • Voltage supply via USB
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
  • PCAN-USB in plastic casing
  • Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
  • Device driver for Windows® CE 6.x (x86 and ARMv4 processor support)
  • CAN monitor PCAN-View for Windows® Details ...
  • Programming interface PCAN-Basic for developing applications with CAN connection Details ...
  • Programming interfaces for standardized protocols from the automotive sector
  • Manual in PDF format

 

 

Device driver setup for Windows

Download

PEAK-System installation package for device drivers and tools for Windows® 10, 8.1, 7 (32/64-bit) for our PC interfaces.

Device driver for Linux

Website

Device drivers for PEAK CAN interfaces from Kernel 2.4 and higher.

PCAN-USB manual

German English

PCAN-View

Download

Windows® software for displaying, transmitting, and recording CAN and CAN FD messages.

PCAN-Basic API

Download

API for the development of applications with CAN and CAN FD connections for Windows® 10, 8.1, 7 (32/64-Bit)

PCAN-Basic API (Linux)

Download

API for the development of applications with CAN connection for Linux

PCAN-CCP API

Download

API for the development of software for the communication with ECUs according to the CAN Calibration Protocol (CCP)

PCAN-XCP API

Download

API for the development of software for the communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP)

PCAN-ISO-TP API

Download

API for the transfer of data packages according to ISO-TP (ISO 15765-2)

PCAN-UDS API

Download

API to communicate with control devices according to UDS (ISO 14229-1)

PCAN-OBD-2 API

Download

API for the vehicle diagnostics according to OBD-2 (ISO 15765-4)

PCAN-PassThru API

Download

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces. Installation for Windows® 10, 8.1, 7 (32/64-bit) includes interface DLLs, a configuration software, the PCAN-Basic API, and the PCAN-ISO-TP API. The download also contains the documentation (English).

Windows CE6 package

Download

PCAN-CE package for Microsoft Windows® CE 6.x

Windows 2000 package

Download

Device drivers for Windows® 2000 and the CAN monitor PCAN-View.

BaudTool

Download

Windows® software for calculating the BTR0/BTR1 baud rate register