Important
For more information about each parameter, please refer to the companion PDF documentation PCAN-Parameter_Documentation.pdf.
PCAN-Basic.NET Library Documentation
TPCANParameter Enumeration
Represents a PCAN parameter or a PCAN Value that can be read or set.
Definition
Namespace: Peak.Can.Basic.BackwardCompatibility
Assembly: PCANBasic.NET (in PCANBasic.NET.dll) Version: 5.1.0
Assembly: PCANBasic.NET (in PCANBasic.NET.dll) Version: 5.1.0
C#
public enum TPCANParameterVB
Public Enumeration TPCANParameterC++
public enum class TPCANParameterRemarks
With some exceptions, a channel must first be initialized before their parameters can be read or set.
Members
| PCAN_DEVICE_ID | 1 | Device identifier parameter. |
| PCAN_5VOLTS_POWER | 2 | PCAN "5-volt power" parameter. |
| PCAN_RECEIVE_EVENT | 3 | PCAN receive event handler parameter. |
| PCAN_MESSAGE_FILTER | 4 | PCAN message filter parameter. |
| PCAN_API_VERSION | 5 | PCAN-Basic API version parameter. |
| PCAN_CHANNEL_VERSION | 6 | PCAN device channel version parameter. |
| PCAN_BUSOFF_AUTORESET | 7 | PCAN "reset on bus-off" parameter. |
| PCAN_LISTEN_ONLY | 8 | PCAN "listen-only" parameter. |
| PCAN_LOG_LOCATION | 9 | Directory path for log files. |
| PCAN_LOG_STATUS | 10 | Debug-Log activation status. |
| PCAN_LOG_CONFIGURE | 11 | Configuration of the debugged information (LOG_FUNCTION_***). |
| PCAN_LOG_TEXT | 12 | Custom insertion of text into the log file. |
| PCAN_CHANNEL_CONDITION | 13 | Availability status of a PCAN Channel. |
| PCAN_HARDWARE_NAME | 14 | PCAN "hardware name" parameter. |
| PCAN_RECEIVE_STATUS | 15 | "Receive Status" parameter for incoming messages. |
| PCAN_CONTROLLER_NUMBER | 16 | Zero-based index of a CAN-Controller in a PCAN device. |
| PCAN_TRACE_LOCATION | 17 | Directory path for PCAN trace files. |
| PCAN_TRACE_STATUS | 18 | PCAN tracing activation status. |
| PCAN_TRACE_SIZE | 19 | Configuration of the maximum file size of a PCAN trace. |
| PCAN_TRACE_CONFIGURE | 20 | Configuration of the trace file storing modes (TRACE_FILE_***). |
| PCAN_CHANNEL_IDENTIFYING | 21 | Physical identification of an USB based PCAN Channel. |
| PCAN_CHANNEL_FEATURES | 22 | Capabilities of a PCAN device (FEATURE_***). |
| PCAN_BITRATE_ADAPTING | 23 | Attachment to an existing connection with unknown/different bit rate. |
| PCAN_BITRATE_INFO_BTR | 24 | Current bit rate as a Baud Rate Timing Register value (standard CAN 2.0 A/B). |
| PCAN_BITRATE_INFO | 24 |
DEPRECATED parameter. Use PCAN_BITRATE_INFO_BTR instead.
Obsolete. |
| PCAN_BITRATE_INFO_FD | 25 | Current bit rate as FD String value (CAN-FD). |
| PCAN_BUSSPEED_NOMINAL | 26 | Current nominal CAN speed as bits per seconds. |
| PCAN_BUSSPEED_FD | 27 | Current CAN FD speed as bits per seconds. |
| PCAN_BUSSPEED_DATA | 27 |
DEPRECATED parameter. Use PCAN_BUSSPEED_FD instead.
Obsolete. |
| PCAN_IP_ADDRESS | 28 | Remote address as a IPv4 formatted string. |
| PCAN_LAN_SERVICE_STATUS | 29 | Running status of the Virtual PCAN-Gateway Service. |
| PCAN_ALLOW_STATUS_FRAMES | 30 | "Receive Status" parameter for Status frames. |
| PCAN_ALLOW_RTR_FRAMES | 31 | "Receive Status" parameter for RTR frames. |
| PCAN_ALLOW_ERROR_FRAMES | 32 | "Receive Status" parameter for Error frames. |
| PCAN_INTERFRAME_DELAY | 33 | Delay, in microseconds, between sending frames. |
| PCAN_ACCEPTANCE_FILTER_11BIT | 34 | Acceptance filter over code and mask for 11-bit CAN IDs. |
| PCAN_ACCEPTANCE_FILTER_29BIT | 35 | Acceptance filter over code and mask for 29-bit CAN IDs. |
| PCAN_IO_DIGITAL_CONFIGURATION | 36 | Activation of digital pins as outputs. |
| PCAN_IO_DIGITAL_VALUE | 37 | Multiple setting of digital pin values. |
| PCAN_IO_DIGITAL_SET | 38 | Selective setting of digital pin values to "high". |
| PCAN_IO_DIGITAL_CLEAR | 39 | Selective setting of digital pin values to "low". |
| PCAN_IO_ANALOG_VALUE | 40 | Value reading of a single analog pin. |
| PCAN_FIRMWARE_VERSION | 41 | Firmware version of a PCAN device. |
| PCAN_ATTACHED_CHANNELS_COUNT | 42 | Amount of PCAN channels attached to a system. |
| PCAN_ATTACHED_CHANNELS | 43 | Information about PCAN channels attached to a system. |
| PCAN_ALLOW_ECHO_FRAMES | 44 | "Receive Status" parameter for Echo frames. |
| PCAN_DEVICE_PART_NUMBER | 45 | PEAK's device part number (IPEH number). |
| PCAN_HARD_RESET_STATUS | 46 | Activation status of hard reset processing via PCANBasic.Reset calls. |
| PCAN_LAN_CHANNEL_DIRECTION | 47 | Communication direction of a PCAN Channel representing a PCAN-LAN interface. |
| PCAN_DEVICE_GUID | 48 | Get the global unique device identifier (GUID) associated to a device |
| PCAN_BITRATE_INFO_CC | 49 | Current bit rate as CC String value (CAN-CC). |
| PCAN_BITRATE_INFO_XL | 50 | Current bit rate as XL string value (CAN-XL). |
| PCAN_BUSSPEED_XL | 51 | Current CAN XL speed as bits per seconds. |