BitrateFD(BitrateFDClockFrequency, UInt32, UInt32, UInt32, UInt32, UInt32, UInt32, UInt32, UInt32) Constructor

Initializes an instance of a BitrateFD object.

Definition

Namespace: Peak.Can.Basic
Assembly: PCANBasic.NET (in PCANBasic.NET.dll) Version: 5.1.0
C#
public BitrateFD(
	BitrateFDClockFrequency frequency = BitrateFDClockFrequency.Mhz_80,
	uint nominalBrp = 0,
	uint nominalTseg1 = 0,
	uint nominalTseg2 = 0,
	uint nominalSjw = 0,
	uint dataBrp = 0,
	uint dataTseg1 = 0,
	uint dataTseg2 = 0,
	uint dataSjw = 0
)

Parameters

frequency  BitrateFDClockFrequency  (Optional)
The clock frequency to use for the CAN FD bit rate.
nominalBrp  UInt32  (Optional)
The bit rate prescaler value (BRP) of the nominal part of the CAN FD bit rate.
nominalTseg1  UInt32  (Optional)
The time segment 1 value (TSEG1) of the nominal part of the CAN FD bit rate.
nominalTseg2  UInt32  (Optional)
The time segment 2 value (TSEG2) of the nominal part of the CAN FD bit rate.
nominalSjw  UInt32  (Optional)
the resynchronization jump value (SJW) of the nominal part of the CAN FD bit rate.
dataBrp  UInt32  (Optional)
The bit rate prescaler value (BRP) of the data part of the CAN FD bit rate.
dataTseg1  UInt32  (Optional)
The time segment 1 value (TSEG1) of the data part of the CAN FD bit rate.
dataTseg2  UInt32  (Optional)
The time segment 2 value (TSEG2) of the data part of the CAN FD bit rate.
dataSjw  UInt32  (Optional)
the resynchronization jump width value (SJW) of the data part of the CAN FD bit rate.

See Also