PCAN-Basic.NET Library Documentation
Filtering
Configures this instance to do single CAN identifier filtering.
Definition
Namespace: Peak.Can.Basic
Assembly: PCANBasic.NET (in PCANBasic.NET.dll) Version: 5.1.0
Assembly: PCANBasic.NET (in PCANBasic.NET.dll) Version: 5.1.0
C#
public void SetSingleId(
uint id,
FilterMode mode = FilterMode.Standard,
FilterBehavior behavior = FilterBehavior.Include
)VB
Public Sub SetSingleId (
id As UInteger,
Optional mode As FilterMode = FilterMode.Standard,
Optional behavior As FilterBehavior = FilterBehavior.Include
)C++
public:
void SetSingleId(
unsigned int id,
FilterMode mode = FilterMode::Standard,
FilterBehavior behavior = FilterBehavior::Include
)Parameters
- id UInt32
- A value indicating the allowed CAN identifier.
- mode FilterMode (Optional)
- A value indicating the filter mode used for CAN identifier verification.
- behavior FilterBehavior (Optional)
- Indicates the operation to perform when a CAN message matches this criterion.