PCAN-Basic.NET Library Documentation
Filtering
Initializes a filtering criterion for a CAN messages using an specific identifier.
Definition
Namespace: Peak.Can.Basic
Assembly: PCANBasic.NET (in PCANBasic.NET.dll) Version: 5.1.0
Assembly: PCANBasic.NET (in PCANBasic.NET.dll) Version: 5.1.0
C#
public FilteringCriterion(
uint singleId,
FilterMode canMode = FilterMode.Standard,
FilterBehavior behavior = FilterBehavior.Include
)VB
Public Sub New (
singleId As UInteger,
Optional canMode As FilterMode = FilterMode.Standard,
Optional behavior As FilterBehavior = FilterBehavior.Include
)C++
public:
FilteringCriterion(
unsigned int singleId,
FilterMode canMode = FilterMode::Standard,
FilterBehavior behavior = FilterBehavior::Include
)Parameters
- singleId UInt32
- A value indicating the allowed CAN identifier.
- canMode FilterMode (Optional)
- A value indicating the filter mode used for CAN identifier verification.
- behavior FilterBehavior (Optional)
- Indicates the operation to perform when a CAN message matches this criterion.