PEAK PCAN-USB+ Insite Cummins_RP1210A

This forum covers issues concerning multiple software products.

PEAK PCAN-USB+ Insite Cummins_RP1210A

Postby Sergio » Mon 29. Aug 2016, 19:03

Where to find Wine driver 64 for PR1210 Insite 7.6.240. With Kalterm 3.6.4 works.

PCANRP32.INI
Configuration file for the PEAK implementation
of the Recommended Practices 1210, version A
Author: Keneth Wagner
[DeviceInformation5]
DeviceID=5
DeviceDescription=PEAK PCAN-USB
DeviceName=pcan_usb

Communication in PCan View via Cummins_Net@USB (250 kBit/s) ?

The Peak Systems PCAN-USB adapter upgrade firmware needs version 4.4 or
higher to provide optimal performance when using Calterm III. ( 2.8 - current, Can2Flash_USB.exe - no )

autodiagnosa@mail.ru
Attachments
PR1210_Insite Cummins.jpg
PR1210_Insite Cummins.jpg (166.01 KiB) Viewed 4740 times
Last edited by U.Wilhelm on Mon 29. Aug 2016, 19:53, edited 1 time in total.
Reason: Never post PEAK-System internal Documents !!!
Sergio
 
Posts: 3
Joined: Mon 29. Aug 2016, 18:12

Re: PEAK PCAN-USB+ Insite Cummins_RP1210A

Postby Sergio » Mon 29. Aug 2016, 19:12

1
Attachments
Cummins_Net (250 kBit s).jpg
Cummins_Net (250 kBit s).jpg (57.58 KiB) Viewed 4739 times
Sergio
 
Posts: 3
Joined: Mon 29. Aug 2016, 18:12

Re: PEAK PCAN-USB+ Insite Cummins_RP1210A

Postby U.Wilhelm » Mon 29. Aug 2016, 19:55

OK - but what exact is your request?
If you want to use Cummins Tools, buy from Cummins the CAN Interface. We do not send out customer special firmware.
Also never post documenst to public if you are NOT the ownwer!!
--------------------------------
PEAK-System Technik
Technical Support Team
support@peak-system.com
-------------------------------
User avatar
U.Wilhelm
Sales & Support
Sales & Support
 
Posts: 981
Joined: Fri 10. Sep 2010, 18:34
Location: Darmstadt

Re: PEAK PCAN-USB+ Insite Cummins_RP1210A

Postby Sergio » Tue 30. Aug 2016, 05:54

Understood.
1. firmware needs version 4.4 hex
2. driver 64 for PR1210 Insite
3. Can2Flash_USB.exe
It is only Cummins ?

Tired already send requests and letters sprosboy provide Cummins Toolse.
Easier then to write a driver programmer.
On one laptop Win 86 we should Peak PCAN-USB+Insite Cummins_RP1210A. Installer driver somewhere lost.
Sergio
 
Posts: 3
Joined: Mon 29. Aug 2016, 18:12

Re: PEAK PCAN-USB+ Insite Cummins_RP1210A

Postby G.Lang » Tue 30. Aug 2016, 08:13

Hello Sergio,

please download the SysInfo tool from the following URL -> http://www.peak-system.com/produktcd/To ... ysInfo.exe

Start the *.EXE (no installation required), let the analysis run and save the result as a XML file, send the XML file to info@peak-system.com

best regards
Gunther
G.Lang
Support
Support
 
Posts: 138
Joined: Wed 22. Sep 2010, 13:58
Location: Paradise City


Return to Software



This website uses cookies for analytics, for logins to the online shop and the forum, and for the handling of an order. By browsing this website you agree to the use of cookies. Detailed information on their use can be found in our privacy policy.

OKPrivacy Policy