CoDeSys&Wireless Gateway

CAN to WLAN Gateways in a plastic housing with a flange

CoDeSys&Wireless Gateway

Postby remote » Tue 25. Oct 2016, 06:38

Hello,

I wanna use the Software CoDeSys with the Wireless Gateway to get ride of the PEAK USB Dongel. I can trace the CAN traffic with PCAN Explorer 5 using the Wireless Gateway.
But if i try to send Software updates out of CoDeSys, i get a communication Error. I think i use the wrong communication Parameter.

The attached images shows the communication box in CodeSys. If i use the USB Dongel, the driver is set to PEAK_USB. I tried PEAK_LAN, PEAK_VIRTUAL but it dosent work, i still get a communication error.

Right now i use TCP as transmission protocol on the Gateway.


Anyone got experience using CoDeSys together with the Peak Gateways?
Attachments
2.png
2.png (12.85 KiB) Viewed 8051 times
remote
 
Posts: 4
Joined: Tue 25. Oct 2016, 06:08

Re: CoDeSys&Wireless Gateway

Postby U.Wilhelm » Tue 25. Oct 2016, 07:39

Please contact 3S-Software . If they include as optional Device Type the Virtual CAN Interface it should work. It is exact the same API as used for PCAN-USB, PCAN-PCIe etc. Only the Device Handle is new (new Device Driver)
But this must be done inside CodeSys. We have no access to change / add any Device.
--------------------------------
PEAK-System Technik
Technical Support Team
support@peak-system.com
-------------------------------
User avatar
U.Wilhelm
Sales & Support
Sales & Support
 
Posts: 1009
Joined: Fri 10. Sep 2010, 18:34
Location: Darmstadt

Re: CoDeSys&Wireless Gateway

Postby remote » Mon 7. Nov 2016, 12:39

Short Update, i called the Support again, they are working on it.
remote
 
Posts: 4
Joined: Tue 25. Oct 2016, 06:08

Re: CoDeSys&Wireless Gateway

Postby U.Wilhelm » Mon 7. Nov 2016, 13:10

Thanks for the feedback - we know - we have send them some Ethernet and Wireless Gateways to test their development with real Hardware.
--------------------------------
PEAK-System Technik
Technical Support Team
support@peak-system.com
-------------------------------
User avatar
U.Wilhelm
Sales & Support
Sales & Support
 
Posts: 1009
Joined: Fri 10. Sep 2010, 18:34
Location: Darmstadt

Re: CoDeSys&Wireless Gateway

Postby remote » Wed 9. Nov 2016, 08:51

I've just talked to the CoDeSys Support.

Bad News, they wont implement the Wireless Gateway into CoDeSys Version 2.3, it should/can work with Version 3, no real answer there.
Version 3 of CoDeSys dosent work with our Controllers. (Hydac TTC60)

Now we are at the Point were we could switch to IXXAT Hardware + IXXAT CAN Explorer, fully supported by CoDeSys or try to find a solution.

Is there any way to send the the CoDeSys Project/Boot Project form the PC to the Wireless Gateway -> Controller?

CoDeSys told me, they not responsible after the Boot Project is build.
remote
 
Posts: 4
Joined: Tue 25. Oct 2016, 06:08

Re: CoDeSys&Wireless Gateway

Postby U.Wilhelm » Wed 9. Nov 2016, 09:39

Is there any way to send the the CoDeSys Project/Boot Project form the PC to the Wireless Gateway -> Controller?

Sorry, we could not help you in this matter. Good luck with the new Interface - hopefully you get the support you need..
--------------------------------
PEAK-System Technik
Technical Support Team
support@peak-system.com
-------------------------------
User avatar
U.Wilhelm
Sales & Support
Sales & Support
 
Posts: 1009
Joined: Fri 10. Sep 2010, 18:34
Location: Darmstadt

Re: CoDeSys&Wireless Gateway

Postby johannes » Mon 7. Aug 2017, 12:17

Hello!

Same Problem here, just for the PCAN-Ethernet Gateway DR (IPEH 004010).
I am connected and recieve live-data from an IFM at my pc via Ethernet, visualized at the PCAN-View.
But i am not able to connect to the IFM via CodeSys. I use CodeSys 2.3 and a IFM CR0401.

There is integration for the wireless gateway, but what about the wired gateway?
Is there a solution by now? Some special CAN card driver for connecting via Ethernet?

cheerz
Attachments
code.PNG
code.PNG (19.8 KiB) Viewed 4068 times
johannes
 
Posts: 1
Joined: Mon 7. Aug 2017, 10:42

Re: CoDeSys&Wireless Gateway

Postby U.Wilhelm » Mon 7. Aug 2017, 12:58

Please contact 3S - as far as we know they support the Gateways in 3-x up. See here
It makes no different if you use a Wireless CAN-Gateway (WLAN) or the Ethernet-CAN Gateway (LAN) It both ends up in a Ethernet Socket on the PC / Driver.
--------------------------------
PEAK-System Technik
Technical Support Team
support@peak-system.com
-------------------------------
User avatar
U.Wilhelm
Sales & Support
Sales & Support
 
Posts: 1009
Joined: Fri 10. Sep 2010, 18:34
Location: Darmstadt


Return to PCAN-Wireless Gateway



This website uses cookies for analytics, for logins to the online shop and the forum, and for the handling of an order. By browsing this website you agree to the use of cookies. Detailed information on their use can be found in our privacy policy.

OKPrivacy Policy