some question about PassThru and CANFD

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces.

Re: some question about PassThru and CANFD

Postby uaes_hhl » Sat 8. Dec 2018, 16:22

Hi, hello, thank you very much for your reply. Can the passthru interface be able to set prescaler, tseg1and2, sync jump width, or is there a way to directly set the bit rate and sample point by passthru interface?
Posts: 6
Joined: Mon 15. Oct 2018, 07:04

Re: some question about PassThru and CANFD

Postby K.Wagner » Mon 10. Dec 2018, 09:50


you can set the arbitration bitrate as a pair of BTR0/BTR1 values (WORD value) over the "BaudRate" parameter of the function PassThruConnect:
PassThruConnect(DeviceID, ProtocolID, Flags, BTR0BTR1, pChannelID).
Best regards,
Software Development
Software Development
Posts: 685
Joined: Wed 22. Sep 2010, 12:36
Location: Darmstadt, Germany

Re: some question about PassThru and CANFD

Postby rr_iav » Wed 14. Aug 2019, 12:45

Dear Mr. Wagner
I am also interested in using a CAN-FD enabled PassThru device (Peak PCI FD in my case).
How can I obtain the PT dll for this purpose?
Thanks for you assistance.
Best regards
Posts: 6
Joined: Wed 15. Mar 2017, 16:50

Re: some question about PassThru and CANFD

Postby U.Wilhelm » Wed 14. Aug 2019, 12:53

PEAK-System Technik
Technical Support Team
User avatar
Sales & Support
Sales & Support
Posts: 1040
Joined: Fri 10. Sep 2010, 18:34
Location: Darmstadt


Return to PCAN-PassThru API


This website uses cookies for analytics, for logins to the online shop and the forum, and for the handling of an order. By browsing this website you agree to the use of cookies. Detailed information on their use can be found in our privacy policy.

OKPrivacy Policy