This device cannot start. (Code 10)

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces.

This device cannot start. (Code 10)

Postby G.Lang » Mon 22. Aug 2016, 09:43

If you are using a PCAN-USB FD or a PCAN-USB Pro FD at Windows 10 and you have trouble with the driver installation please follow the steps below:

-> Plug the PCAN-USB Pro FD into the affected USB port from your computer where the error warning appear.

-> Go to the device manager (control panel) and uninstall the driver for the PCAN-USB Pro FD, please select also "Remove the driver software for this device".

-> Unplug the device from the USB port, wait 5 seconds and plug the device into the USB port.

-> If the device is furthermore listed as CAN hardware (or Code 10 is reported) then uninstall the driver again till you see the "unnown device" state.

-> If the device is listed as "unknown device" the uninstall procedure is succesfull finished for this port, please connect the PCAN-USB Pro FD to the next USB port and retry the steps above.

-> Unplug the device from the USB port, wait 5 seconds and plug the device into the USB port.

-> Now install the driver manually via the device manager, select the *.inf and *.sys from the product CD or from C:\Program Files\PEAK-System\PEAK-Drivers\Drivers.

If this solution don´t fix your problem then contact us again.
G.Lang
Support
Support
 
Posts: 139
Joined: Wed 22. Sep 2010, 13:58
Location: Paradise City

Return to PCAN-PassThru API



This website uses cookies for analytics, for logins to the online shop and the forum, and for the handling of an order. By browsing this website you agree to the use of cookies. Detailed information on their use can be found in our privacy policy.

OKPrivacy Policy