Data link physical problems on the CAN bus

Mobile Diagnostic Device for CAN and CAN FD Buses

Data link physical problems on the CAN bus

Postby Filip » Fri 5. Jul 2019, 14:14

Hi,

which types of physical link errors is this device capable of detecting?

Can it detect:
- problems due CAN bus HF/HV PWM noise
- problems due reflection of the signal due to too long CAN bus branches and/or similar topology errors
- problems due to wrong terminator placement on the CAN bus
- other similar physical CAN bus problems (if this is the case, which ones?)

Thanks and best regards,

Filip
Filip
 
Posts: 2
Joined: Fri 5. Jul 2019, 14:06

Re: Data link physical problems on the CAN bus

Postby U.Wilhelm » Fri 5. Jul 2019, 15:39

It is a scopy - so you see the real physical CAN levels which will be decode in real time and show in the scope diplay with the decoded CAN / CAN FD Bits/Information - also when the CAN Stream is not ACK or not complete!
So all you wrote could be find with the unit if you know how CAN on Layer 2 works. Trmination measurement is also included (while the CAN is running ! withot destroing a Frame)

If you placed in Germany, we could send out on request 20 Day Trial of the Device (only to companies that are known and placed in Germany - no private persons) Contact our support team, or vistit us and we show you how to use the unit. A PDF manual could be download from our Support page, and a "on device" Online Help is also available.
--------------------------------
PEAK-System Technik
Technical Support Team
support@peak-system.com
-------------------------------
User avatar
U.Wilhelm
Sales & Support
Sales & Support
 
Posts: 1010
Joined: Fri 10. Sep 2010, 18:34
Location: Darmstadt


Return to PCAN-Diag FD



This website uses cookies for analytics, for logins to the online shop and the forum, and for the handling of an order. By browsing this website you agree to the use of cookies. Detailed information on their use can be found in our privacy policy.

OKPrivacy Policy