We use cookies on our website to provide you with the best possible service and to further improve our website. By clicking the "Accept All" button, you agree to the use of all cookies. You can limit the cookies used by clicking on "Accept selection". Further information and an option to revoke your selection can be found in our privacy policy.

Necessary:

These cookies are necessary for basic functionality. This allows you to register on our website and forum or order products with our online shop.

Statistics:

With these cookies, we collect anonymized usage data for our website. For example, we can see which content is interesting for our visitors and which resolutions are used. We use the information to optimize our website to provide you with the best possible user experience.

Necessary
Statistics

show more

Accept All Accept Selection

PCAN-USB Pro FD - Firmware Version History

2025-05-28 - Version 3.5.3

  • GUID support added

PEAK-Flash tool with embedded firmware file

2024-04-18 - Version 3.4.7

Bug fixes:

  • SOF and OUT-NACK IRQs disabled due to IRQ flooding on OUT-PINGs
  • 2nd device ID was not returned by vendor request (available on Linux)

2022-03-28 - Version 3.4.4

  • CAN Core updated
  • Option added: Send ACK as transmitter
  • Option added: Generate time stamp at start of frame
  • Option added: Ignore BRS frames as receiver
  • LIN commands improvements
  • LIN Wake-Up was not working after LIN power cycles
  • Bugfix: Status Frame suppressed when leaving reset mode during BusOff
  • Internal Firmware improvements
     

2017-08-31 - Version 3.2.0

  • Bugfix for CAN bitrate prescaler
  • Mode added to force CAN 2.0 A/B
  • Timestamps for RCV frames at bit 6 of end-of-frame
     

Version 3.1.1

  • Bugfix CAN core, bad TX data due to RAM pointer increment
  • TX pause added for transmit delay
     

Version 3.1.0

  • Bugfix CAN core, bad TX data due to RAM pointer reset
     

Version 3.0.0

  • New CAN core Gen 3 included (new implementation of BSP/BTL, tested with Bosch Ref CAN model)
     

Version 2.3.1

  • Bugfix/modification for timestamp system (CAN/LIN with offset)
     

Version 2.3.0

  • Firmware version change for USB MSD bootloader
     

Version 2.2.1

  • Bugfix: bad frames in CAN FD ISO mode with DLC=0
     

Version 2.2.0

  • Bugfix "error frames in listen-only mode"
  • USB descriptor for LIN endpoints modified
  • USB "other descriptor" modified
     

Version 2.1.0

  • Modification USB suspend
  • Fast-forward option added
     

Version 2.0.3

  • Flash mode depends on password
  • LED toggle for locked CAN
     

Version 2.0.2

  • CAN BusOff issue fixed
     

Version 2.0.1

  • USB suspend reactivated
     

Version 2.0.0

  • CAN core with ISO/Non-ISO support
  • OEM area added (OEM_CODE, password ...)
     

Version 1.1.6

  • Modification for USB packet sizes of LIN endpoints (limited FIFO size of USB controller, data corruption on parallel CAN/LIN communication)
     

Version 1.1.5

  • FPGA modification for I/O signaling