Nous utilisons des cookies sur notre site web afin de vous fournir le meilleur service possible et d'améliorer encore notre site web. En cliquant sur le bouton "Accepter tout", vous acceptez l'utilisation de tous les cookies. Vous pouvez limiter les cookies utilisés en cliquant sur "Accepter la sélection". Vous trouverez de plus amples informations et une option pour révoquer votre sélection dans notre politique de confidentialité.

Nécessaire :

Ces cookies sont nécessaires pour la fonctionnalité de base. Cela vous permet de vous inscrire sur notre site web et notre forum ou de commander des produits avec notre boutique en ligne.

Statistiques :

Avec ces cookies, nous collectons des données d'utilisation anonymisées pour notre site web. Par exemple, nous pouvons voir quel contenu est intéressant pour nos visiteurs et quelles résolutions sont utilisées. Nous utilisons ces informations pour optimiser notre site web et vous offrir la meilleure expérience utilisateur possible.



PCAN-MicroMod FD Configuration Version History

2022-05-03 - Version 1.1.3


  • The progress update has been improved for module detection, CANopen unlock, firmware settings change, and configuration transfer
  • Some other minor UI improvements

Bug fixes:

  • A missing template file did not cause a warning output
  • The Custom Board template files were missing in the setup
  • Selecting bit rate presets could select the wrong nominal or data bit rates
  • Graphic errors could sometimes occur when editing signal properties
  • An Access Violation error was thrown after loading a project file in which the board type was missing and then a board type was selected in the Target Hardware dialog box
  • An incorrect message box was displayed when attempting to send a configuration to a module that had CANopen or CANopen FD active
  • The command to unlock a CANopen license might not work and a misleading message was displayed if the Microsoft C++ 2010 redistributable package was not installed


2021-02-11 - Version 1.1.2

Bug fixes:

  • Due to an error in the included PCAN-Basic API, a CAN connection could not be established if the version of the PCAN device driver used was older than 4.2.1

2021-02-04 - Version 1.1.1


  • The quick help and the online help have been revised
  • Some other minor improvements

Bug fixes:

  • Some sample and template files have been corrected
  • The reading of the advanced detect information and the configuration data has been improved especially if several modules were connected to the same CAN bus
  • The board type information was not saved correctly in the MicroMod FD project files
  • When loading MicroMod FD project files, an incorrect warning was displayed about the bit alignment of variables that were set-up with data type double and aligned in Motorola order
  • Under certain circumstances, the standard configuration was transferred with incorrectly formatted floating point numbers if the firmware operating mode was changed to PEAK standard
  • Under certain conditions, the Layout tab page was not active in the Symbols window
  • After changing the board type of a new or opened configuration, the services could not be opened with the sidebar

2020-06-19 - Version 1.1.0


  • The Analog Inputs (16-bit) have been expanded to some information about measurement resolution of the selected range
  • The default name of Curve Definitions has been changed because the format of these names does not match to all other formats
  • When an invalid or not supported custom bit rate (e.g. prescaler out of range) is loaded or saved, a new warning message is shown in the Output window
  • When a configuration is sent with an invalid or not supported custom bit rate, an error message is shown in the Output window and the sending is aborted
  • Improved text output in the Output window with different colors
  • Improved handling of Bus-Off errors when trying to re-detect modules
  • New tooltip window that informs about the supported CAN FD clock frequency was added to the Target Hardware dialog box
  • Activation and unlocking of the CANopen firmware was added
  • Switching of the firmware operation mode was added
  • Statistic values Unique ID 0, 1, 2 and 3 were added
  • New possibility to set the Module ID to ANY
  • Some minor improvements

Bug fixes:

  • In the Symbols layout view, the tooltip window did not display the correct MSB and LSB values of the corresponding element
  • A entered Function parameter value was not applied if the mouse was used to select a different parameter value edit field
  • An active feedback output and the corresponding input inverter of a digital function block were not correctly restored when loading a configuration or when changing to another digital function
  • In the Connect dialog box and the Target Hardware dialog box the Preset and Bit Rate drop-down lists were not refreshed when the bit rates or presets definition was changed
  • If the selected hardware did support CAN FD, the Manage Bit Rates command always used the FD bit rates for default selection even if CAN FD was not selected
  • In the Target Hardware dialog box unsupported bit rate presets could be selected
  • Error Active/Passive CAN controller states were not displayed for connections using compatible CAN interfaces; instead, the old-style BUSHEAVY indicator was shown
  • Double-clicking on a variable in the Symbols layout could raise an Access Violation error
  • Loading of unsupported board types was not handled correctly
  • Corrected the display name of PCAN-MicroMod FD Analog 1
  • Removed some memory leaks
  • Some minor bug fixes


  • 'Direction: Reverse' is set as default when the 'Export into Symbols file' dialog box is used the first time
  • Floating-point values can be specified for the frequency range of digital outputs instead of Integer values

2019-08-27 - Version 1.0.0

  • First release