Nous utilisons des cookies sur notre site web afin de vous fournir le meilleur service possible et d'améliorer encore notre site web. En cliquant sur le bouton "Accepter tout", vous acceptez l'utilisation de tous les cookies. Vous pouvez limiter les cookies utilisés en cliquant sur "Accepter la sélection". Vous trouverez de plus amples informations et une option pour révoquer votre sélection dans notre politique de confidentialité.

Nécessaire :

Ces cookies sont nécessaires pour la fonctionnalité de base. Cela vous permet de vous inscrire sur notre site web et notre forum ou de commander des produits avec notre boutique en ligne.

Statistiques :

Avec ces cookies, nous collectons des données d'utilisation anonymisées pour notre site web. Par exemple, nous pouvons voir quel contenu est intéressant pour nos visiteurs et quelles résolutions sont utilisées. Nous utilisons ces informations pour optimiser notre site web et vous offrir la meilleure expérience utilisateur possible.

Nécessaire
Statistiques

plus

PCAN-MicroMod FD - Firmware Version History

This is the version history of the PCAN-MicroMod FD firmware being used on the PCAN-MicroMod FD products in regular CAN or CAN FD operation mode. Please note that an update of this firmware includes the PCAN-MicroMod FD CANopen® firmware and vice versa.

2022-05-03 - Version 1.10.0

  • Board types Eval and Custom are now exchangable; this means a CPU can be configured on one board type and used on the other board type
  • Added check for authentification during configuration

Bug fixes:

  • In case less than 4 inputs were used in function block "ADD", the value of an unused input might not had been 0 and lead to a wrong result
  • In rare cases, a transmit message was missing

Note: "PCAN-MicroMod FD Configuration" version 1.1.3 or later is required for configuration.


PEAK-Flash tool with embedded firmware files
PCAN-MicroMod FD Configuration

2021-01-28 - Version 1.9.11

  • Timeout-detection for frequency-input measurement did not work correctly in all cases
  • Signed variables were sometimes calculated wrong

2020-08-02 - Version 1.9.10

Bug fixes:

  • Inversion of digital inputs did not work always correctly

2020-07-09 - Version 1.9.9

Bug fixes:

  • Motherboard Analog1: negative analog input values were incorrect in case a scale value not equal 1 was used

2020-06-05 - Version 1.9.8

  • In case the configuration of a DR module is invalid, but bit rate turn switches are valid, the CAN engine is initialized according to the switch position and the module runs in Standard (not CANopen) mode
  • The bit rate table for non-DR modules did contain a samplepoint of 87.5% for 500 kbit/s, CAN FD without BRSs. Corrected to a samplepoint of 80%

2020-05-12 - Version 1.9.7

Improvements:

  • Enhanced PEAK-Flash identification

Bug fixes:

  • PCAN-MicroMod FD Analog 1 modules with serial numbers from 00100 to 00143 might return incorrect Analog Input (16-bit) results in +/-20V measurement range (~2.5% too high)

2020-04-09 - Version 1.9.6

Improvements:

  • Added more configuration and board specific information when detecting the CPU module or the different motherboards with the configuration software
  • Added new module descriptions for PEAK-Flash

Changes:

  • SSP (secondary sample point) of data bit rates is set to 80% for bit rates >= 2.5 Mbit/s
  • If no valid configuration is loaded the module blinks red and green alternately
  • Frequency of digital outputs in PWM mode was changed from integer to float

Bug fixes:

  • Updated the bit rate table due to some bugs
  • PWM measurement of channel 1,3, and 5 was inactive

2020-02-14 - Version 1.9.5

  • Improvement: New scale calibration for +/-20V range of 16-bit analog inputs

2019-12-18 - Version 1.9.2

  • Bug fix: Reading module information did not initialize transfer counter correctly

Version 1.9

  • Bug fix for digital inputs: Option to invert the signal was missing in the configuration

Version 1.8

  • I2C-EEPROM was removed. Binary configuration is now stored in QSPI flash

2019-08-28 - Version 1.6

  • First official release