This website uses cookies for analytics, for logins to the online shop and the forum, and for the handling of an order. By browsing this website you agree to the use of cookies. Detailed information on their use can be found in our privacy policy.
The PCAN-PCI/104-Express card enables the connection of one, two, or four CAN buses to a PCI/104-Express system. Up to four cards can be stacked together. The CAN bus is connected using a 9-pin D-Sub plug on the slot brackets supplied. There is galvanic isolation of up to 500 Volts between the computer and CAN sides. There are versions with one, two and four channels.
The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.
The product PCAN-PCI/104-Express Quad opto-decoupled (IPEH-003058) is no longer manufactured! Alternatively, the PCAN-PCI/104-Express FD Four Channel (IPEH-004082) can be used, since it behaves identically concerning the CAN functionality.
Pin | Pin assignment |
---|---|
1 | Not connected |
2 | CAN-L |
3 | GND |
4 | Not connected |
5 | Not connected |
6 | GND |
7 | CAN-H |
8 | Not connected |
9 | Not connected / optional +5V |
PEAK-System installation package for device drivers and tools for Windows® 10, 8.1 (32/64-bit) for our PC interfaces. Included tools: PEAK-CPL, PCAN-View, PLIN-View Pro, and Virtual PCAN-Gateway.
Device drivers for PEAK CAN interfaces running on Kernel 2.6 and higher.
Windows® software for displaying, transmitting, and recording CAN and CAN FD messages.
API for the development of applications with CAN and CAN FD connections for Windows® 10, 8.1 (32/64-bit).
API for the development of applications with CAN connection for Linux.
API for the development of software for the communication with ECUs according to the CAN Calibration Protocol (CCP) for Windows® 10, 8.1 (32/64-bit).
API for the development of software for the communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP) for Windows® 10, 8.1 (32/64-bit).
API for the transfer of data packages according to ISO-TP (ISO 15765-2) for Windows® 10, 8.1 (32/64-bit).
API to communicate with control devices according to UDS (ISO 14229-1) for Windows® 10, 8.1 (32/64-bit).
API for the vehicle diagnostics according to OBD-2 (ISO 15765-4) for Windows® 10, 8.1 (32/64-bit).
Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces. Installation for Windows® 10, 8.1 (32/64-bit) includes interface DLLs, a configuration software, the PCAN-Basic API, and the PCAN-ISO-TP API. The download also contains the documentation (English).