Nous utilisons des cookies sur notre site web afin de vous fournir le meilleur service possible et d'améliorer encore notre site web. En cliquant sur le bouton "Accepter tout", vous acceptez l'utilisation de tous les cookies. Vous pouvez limiter les cookies utilisés en cliquant sur "Accepter la sélection". Vous trouverez de plus amples informations et une option pour révoquer votre sélection dans notre politique de confidentialité.

Nécessaire :

Ces cookies sont nécessaires pour la fonctionnalité de base. Cela vous permet de vous inscrire sur notre site web et notre forum ou de commander des produits avec notre boutique en ligne.

Statistiques :

Avec ces cookies, nous collectons des données d'utilisation anonymisées pour notre site web. Par exemple, nous pouvons voir quel contenu est intéressant pour nos visiteurs et quelles résolutions sont utilisées. Nous utilisons ces informations pour optimiser notre site web et vous offrir la meilleure expérience utilisateur possible.

Nécessaire
Statistiques

plus

Virtual PCAN-Gateway Version History

2023-12-15 - Version 2.2.2

Bug fixes:

  • In some scenarios, a PCAN-LAN channel remained available even though its routes were not active (ghost device)

Changes:

  • The hardware handle allocation process for registered PCAN-LAN channels has been improved and adjusted to be more similar to other PCAN devices


Please note: The Virtual PCAN-Gateway is a part of our driver installation.

Download Setup

2023-10-04 - Version 2.2.1

Improvements:

  • General code enhancements

Bug fixes:

  • In some scenarios, the Device ID and firmware version information was lost at the time of route connection
  • The mode change of a CAN channel from standard CAN to CAN FD or vice versa within a PCAN-Gateway device was not reported to the connected PCAN participants on the PC side
  • The 'TCPDelay' parameter of a Virtual PCAN-Gateway route was applied upside down
  • The 'Join' operation in the Virtual PCAN-Gateway Configuration tool incorrectly configured the CAN channel of the opposing routes, preventing these routes from being connected

2023-07-12 - Version 2.2.0

Improvements:

  • It is now possible to bind Virtual PCAN-Gateway routes to a remote CAN channel, as an additional check to avoid connections to unwanted CAN channels
  • The registration process of PCAN-Gateways devices in the PCAN-LAN driver was improved

Bug fixes:

  • The sound for channel plug-in was being played twice in some scenarios
  • The route status displayed in the 'Edit Route' pane was not being updated, when this was changed via the pop-up menu or the Activate/Deactivate button
  • The hardware handle allocation process was faulty, causing PCAN-LAN/CAN channels to be mixed up
  • In some scenarios, trying to add a new route was failing because needed configuration controls were deactivated
  • When trying to edit an incoming route, the IP field was showing wrong values ins some scenarios

Changes:

  • The port 52957 is now reserved. It is not allowed anymore to use it for registering new routes
  • The behavior of the sound played when a PCAN-LAN channel is connected/disconnected was improved
  • There are new colored lamps that represent additional status indicators and help with troubleshooting communication problems:
    • A yellow/green lamp is now shown for inactive routes (they are connected but have their associated CAN channel deactivated)
    • A purple lamp is now shown for active routes when the PCAN-LAN driver is not loaded

2023-03-07 - Version 2.1.2

Bug fixes:

  • Text containing special characters retrieved via the JSON interface from remote devices was displayed incorrectly in the Configuration Tool

2022-12-07 - Version 2.1.1

Improvements:

  • Windows device connection sounds are now played when PCAN-LAN channels perform Plug-in/out events

Bug fixes:

  • The timestamp of incoming messages were synchronized with a start time of 0, so that they always seemed to be in the past. This prevented messages from being traced in tools like PCAN-View and PCAN-Explorer
  • The Virtual Gateway Configuration tool failed to show the status 'Handshake off' of routes with this configuration when retrieving information from scanned devices

2022-10-24 - Version 2.1.0

Improvements:

  • New native ARM64 version of the Virtual PCAN-Gateway

Changes:

  • Additional Plug-in/Plug-out events of PCAN-LAN channels are now performed when the 'Active' setting of the CAN Channel associated with a route is changed

2022-08-31 - Version 2.0.4

Improvements:

  • Time interval accuracy between incoming messages was improved
  • Additional general code enhancements

Bug fixes:

  • The support link “Control Panel App” was updated

2021-12-14 - Version 2.0.3

Improvements:

  • General code enhancements

Bug fixes:

  • In some scenarios, when an energy event occurred (power off of PCAN-Gateway/FD devices, sleep/hibernation of host PC), the Virtual PCAN-Gateway service was stopping the communication indefinitely
  • In some scenarios, when an energy event occurred (power off of PCAN-Gateway/FD devices, sleep/hibernation of host PC), the CPU load was being raised up to 100% and a service restart was needed
  • The Device ID retrieved from a gateway device was being parsed as signed integer instead of as unsigned integer
  • Configuration Tool: It was not possible to parse PCAN-Gateway/FD INI files with version v2 when doing Join operations
  • Configuration Tool: The application was crashing when using the JSON interface to get routes information from PCAN-Gateway FD devices

Changes:

  • Configuration Tool: Remote Virtual PCAN-Gateways are now ignored and not included in the list of results when scanning for PCAN-Gateway devices

2021-01-26 - Version 2.0.2

Bug fixes:

  • The “Join operation” in the Virtual PCAN-Gateway Configuration Tool was not working with INI files coming from PCAN Gateways FD devices
  • Changing the activation status of routes with direction device->PC on PCAN-Gateway devices erroneously caused the nominal bitrate on the PC side to be set to 0

2020-12-14 - Version 2.0.1

Bug fixes:

  • Typo in the user interface of the configuration tool corrected
  • The enabled/disabled commands of the popup menu for route activation, 'Switch ALL routes on' and 'Switch ALL routes off', showed wrong states
  • Fixed service crashes that occurred when connecting incoming routes more than once at the same time

2020-07-20 - Version 2.0.0

Improvements:

  • Routes can be now configured with any IP address. The strict relationship between defined routes and an explicit network adapter was removed
  • Virtual PCAN-Gateways (PC with PCAN-LAN driver) can now be found from other PCAN-Gateway devices, when performing a scan
  • The configuration tool can now scan for other devices of the Gateway family on a network
  • The configuration tool can now retrieve routing information of remote PCAN-Gateways using the JSON interface
  • It is now possible to perform a reset of CAN channels of PCAN-Gateway devices connected over PCAN-LAN (using PCAN software like PCAN-View, among others)
  • It is now possible to configure a Device-ID on PCAN-Gateway devices (a PCAN-Gateway with firmware 2.8.2 or greater is required)
  • The name of PCAN-Gateway devices connected to a Virtual PCAN-Gateway are now shown in the route list within the configuration tool, together with their IP addresses
  • Support for CAN FD communication added (a CAN FD capable PCAN-Gateway is required and PCAN-LAN driver version 4.2.1 or greater)
  • Multiple activation/deactivation/deletion of routes over the configuration tool is now possible
  • The amount of routes that can be registered using the configuration tool was increased to 64
  • General code enhancements

Bug fixes:

  • Routes were failing to reconnect after a WSAEINTR error
  • In some scenarios, invalid commands were being processed as valid ones, instead of being discarded
  • Internal conversions were not working well, when translating the MAC-ID and other values
  • When deleting routes, a background connection to the remote device was still being kept open
  • The footer of the configuration tool was not showing version information
  • The configuration tool was not showing the version of the Virtual PCAN-Gateway service within the info panel

2017-09-14 - Version 1.3.1

Improvements:

  • The status of the Gateway CAN channels is now forwarded to the PCAN-LAN driver (BUS PASSIVE/WARNING/etc.)
  • The configuration tool can now be used as command-line tool for some actions:
    • /reload: causes a reload of all configured routes. Same as clicking the Reload button under Device / Configuration
    • /routeson: turns all configured routes on. Same as context menu command 'Switch ALL Routes On' under Routing / Manage Routes
    • /routesoff: turns all configured routes off. Same as context menu command 'Switch ALL Routes Off' under Routing / Manage Routes
  • The use of the port 45321 when creating or editing routes within the configuration tool is now denied (marked as reserved)

Bug fixes:

  • Routes were unable to connect if a PCAN-Ethernet Gateway was idle while the PC was being started or rebooted. This caused the registration of an invalid IP address
  • Incoming routes (from device to PC) could not connect if they were initialized before the network (network adapter or LAN cable) was activated

2017-02-01 - Version 1.3.0

Improvement:

  • It is now possible to use different IP addresses on the same network card

Bug fixes:

  • VPOI-Service dependencies were adjusted to avoid race conditions with the Windows firewall at startup
  • Fixed inconsistencies concerning the font in the Virtual PCAN-Gateway Configuration user interface

2016-01-26 - Version 1.2.0

Improvements:

  • It is now possible to define up to 16 routes
  • Added a command in the Configuraton Tool (Device | Configuration) to force a reload of the routes (behavior is similar to restarting the service)
  • Information about the firmware version is now available
  • Bit rate and CAN Listen-only changes in a PCAN-Gateway device are now communicated to the service and forwarded to the driver (PCAN-Gateway software package 2.6.0 required)

Bug fixes:

  • Fixed access violation when doing the "Join routes" process in the configuration tool
  • Fixed access violation when invocating the context menu on the route list in the configuration tool, after deleting a route
  • Fixed access violation when a wrong focus on the "Manage Routes" list in the configuration tool was evaluated
  • The service excecutable crashed sometimes while finalizing

2015-11-06 - Version 1.1.0

Improvements:

  • The communication protocol between PCAN-Gateways and the Virtual PCAN-Gateway was enhanced
  • Minor improvements in the user interface of the Configuration Tool
  • General code optimizations

Bug fixes:

  • While editing a route in the Configuration Tool the left side menu is no longer blocked
  • Double plugged-in route problem fixed
  • Problem that was causing abandoned routes to be shown was fixed
  • Problem that didn't let active routes to get connected was fixed
  • Problem solved that sometimes caused the service to crash at finalization time
  • The 8th defined route was lost after restarting the service. After that it was impossible to define 8 routes, even after deleting all of them

2015-07-01 - Version 1.0.1

  • Improvement for the Virtual PCAN-Gateway Manager: The communication protocol between routes and driver was enhanced
  • Bug fix for the Virtual PCAN-Gateway Manager: Listen-Only status of CAN channels were being not forwarded to the driver
  • Bug fix: The link to call the PEAK Control Panel Applet was not working in some scenarios

2015-06-17 - Version 1.0.0

  • First Release