PCAN-Chip USB
Stamp Module for the Implementation of CAN FD to USB Connections

PCAN-Chip USB Eval
IPEH-004025-EVAL € 250,00

All prices are plus the at present valid value added tax!

Description

For custom hardware designs a CAN connection can be implemented with the Stamp module, which communicates via USB 2.0 with the hardware. The integrated CAN controller supports the protocols CAN 2.0 A/B as well as CAN FD. The physical CAN connection is determined by external wiring. The Stamp module with its single-sided mounting and plated half-holes is suitable for automatic assembly.

The optional PCAN-Chip USB Eval board simplifies the development of a custom board based on the Stamp module.

In addition to the documentation for the integration of the Stamp module, the scope of supply of the PCAN-Chip USB includes licenses for the Windows and Linux device drivers, for the CAN monitor PCAN-View, and for the PCAN-Basic API.

Note:


The evaluation board (IPEH-004025-EVAL) can be ordered regularly via the online shop. If you are interested in the PCAN-Chip USB (IPEH-004025), please contact .

 

 

Specifications

PCAN-Chip USB

  • High-speed USB 2.0 (compatible to USB 1.1 & 3.0)
  • FPGA implementation of the CAN FD controller
  • Complies with CAN specifications 2.0 A/B and FD
  • CAN FD support for ISO and Non-ISO standard switchable
  • Measurement of bus load including error frames and overload frames on the physical bus
  • Induced error generation for incoming and outgoing CAN messages
  • 100-percent compatible with the USB device drivers and the software from PEAK-System
  • 2 connections for status LEDs
  • Voltage supply 3.3 V DC
  • New firmware can be loaded via USB
  • Dimensions: 25 x 20 mm
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

PCAN-Chip USB Eval

  • CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 303-1)
  • CAN transceiver NXP TJA1044GT
  • USB connector type B, standard ESD protection circuit
  • 2-color LED for CAN status and power supply
  • Voltage supply via USB
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Scope of supply

Scope of supply PCAN-Chip USB

  • PCAN-Chip USB
  • Documentation for wiring and integration including a sample circuit diagram
  • One license per chip for:
    • Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
    • CAN monitor PCAN-View for Windows® Details ...
    • Programming interface PCAN-Basic for developing applications with CAN connection Details ...
    • Programming interfaces for standardized protocols from the automotive sector

Scope of supply PCAN-Chip USB Eval

  • PCAN-Chip USB Eval
  • PCAN-Chip USB incl. scope of supply
  • USB connector cable

The license fees for CAN to Robert Bosch GmbH are included. If you are interested and for more information, please contact

 

 

Downloads

Device driver setup for Windows

PEAK-System installation package for device drivers and tools for Windows® 10, 8.1, 7 (32/64-bit) for our PC interfaces.

Device driver for Linux

Device drivers for PEAK CAN interfaces from Kernel 2.4 and higher.

PCAN-Chip USB & PCAN-Chip USB Eval manual

PCAN-View

Windows® software for displaying, transmitting, and recording CAN and CAN FD messages

PCAN-Basic API

API for the development of applications with CAN and CAN FD connections for Windows® 10, 8.1, 7 (32/64-Bit)

PCAN-Basic API (Linux)

API for the development of applications with CAN connection for Linux

PCAN-CCP API

API for the development of software for the communication with ECUs according to the CAN Calibration Protocol (CCP)

PCAN-XCP API

API for the development of software for the communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP)

PCAN-ISO-TP API

API for the transfer of data packages according to ISO-TP (ISO 15765-2)

PCAN-UDS API

API to communicate with control devices according to UDS (ISO 14229-1)

PCAN-OBD-2 API

API for the vehicle diagnostics according to OBD-2 (ISO 15765-4)

PCAN-PassThru API

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces. Installation for Windows® 10, 8.1, 7 (32/64-bit) includes interface DLLs, a configuration software, the PCAN-Basic API, and the PCAN-ISO-TP API. The download also contains the documentation (English).

More

Additional information on other pages:

PCAN-Chip USB forum: Section for the PCAN-Chip USB and the PCAN-Chip USB Eval for
question and support
The new standard CAN FD: support and compatible products
CAN device driver 4.x version history
PCAN-Chip USB firmware version history