PCAN-MicroMod FD Digital 1&2

The PCAN-MicroMod FD plug-in board can be purchased together with ready-to-use motherboards that provide peripherals for specific requirements. For the connection of CAN, I/O, and power supply, spring terminal connectors are used. The motherboards PCAN-MicroMod FD Digital 1 and 2 put the emphasis on digital inputs and outputs, which are provided with appropriate protective circuitry. The digital outputs of Digital 1 are equipped with low-side switches and those of Digital 2 with high-side switches.

The PCAN-MicroMod FD is configured using the supplied Windows software. In addition to simple I/O mapping to CAN IDs, function blocks are also available for processing the data. The configuration created on the computer is transferred via the CAN bus to the PCAN-MicroMod FD which then runs as an independent CAN node. Multiple modules can be configured independently on a CAN bus.

Requirements:

The configuration requires a PEAK CAN interface.

• Board with plugged on PCAN-MicroMod FD
• Configuration via the CAN bus with the Windows^® software PCAN-MicroMod FD Configuration
• High-speed CAN connection (ISO 11898-2)
  
  • Complies with CAN specifications 2.0 A/B and FD
  • CAN FD bit rates for the data field (64 bytes max.) from 20 kbit/s up to 10 Mbit/s
  • CAN bit rates from 20 kbit/s up to 1 Mbit/s
  • Switchable CAN termination
• 2 frequency outputs
  
  • Low-side switches
  • Adjustable frequency range from 0 to 20 kHz
• 1 analog input for voltage monitoring up to 30 V, resolution 12 bit
• 8 digital inputs
  
  • Pull-up or pull-down configurable
• 8 digital outputs
  
  • Digital 1: Low-side switches
  • Digital 2: High-side switches
  • PWM mode: resolution duty cycle 16 bit, adjustable frequency range from 0 to 20 kHz
• 3 analog inputs
  
  • Resolution 12 bit
  • Measuring range 0 - 10 V
• 4-bit rotary coding switch for setting the module ID
• 3 status LED
• Aluminum casing with spring terminal connectors
• Operating voltage 8 to 30 V
• Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

• PCAN-MicroMod FD
  
• PCAN-MicroMod FD motherboard in aluminum casing including mating connectors
  
• PCAN-MicroMod FD Configuration for Windows^® 10, 8.1, 7
  
• Manual in PDF format
  
  

Requirements:

• The configuration requires a PEAK CAN interface

Additional information:

• PCAN-MicroMod FD Configuration: Windows^® configuration software for PCAN-MicroMod FD products
• PEAK-System Forum: Section for the PCAN-MicroMod FD Digital 1 & 2 for questions and support
• The new standard CAN FD: support and compatible products